Trans Am Exhaust Tips
the guy from the website i posted ssclones emailed me and told me he updated the website. You can now get on a waiting list and he should have some early febuary. He will contact you when he has the first few ready. Wether or not that happens im just letting you guys know since there is interest.
the guy from the website i posted ssclones emailed me and told me he updated the website. You can now get on a waiting list and he should have some early febuary. He will contact you when he has the first few ready. Wether or not that happens im just letting you guys know since there is interest.
Not knocking the guy but yes he put me on a "waiting list" many months ago and said he'd have them before December. He is very good at correspondence and seems friendly enough but I believe he is slightly unrealistically optimistic about his ability or timeframe to get more in stock. Basically what I'm saying is set your expectations accordingly. I went with the EBay Yonakas out of impatience. I'll let you all know what they're like.
I got my 3.5" tips from the ssclone guy's ebay store - I paid for 4" and he sent the smaller ones by mistake. When I told him (very nice guy on the phone), he said he had my info and would send the correct ones as soon as they were back in stock... that was in June
I wanna get some tips with burned tip effect on my ws6. Something like a borla shapeed tip. Dual hexagon tips. I know hooker makes a dual hexagon chrome exhaust tip. They are 2.5, but I could care less. It will not affect my hp.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo Got my Yonakas from EBaaaay. My plan was to use these as a filler to replace the WEEEEAAAAKK SLP single rolled duals and await some SSClones to get restocked since those would be staggerred to form with bumper and also 4.0 outlet as opposed to 3.5... But I'll be damned if I don't love these. 3.5 is plenty big and personal preference.. I know many will disagree.. but I'm A-OK with them not being staggerred in fact I prefer it. The SLPs were staggerred and I liked that look but I love this. I know they look like I have them sticking out a bit too much but it was deliberate and I love it as well. No doubt I'm in the minority here but I don't care. These are very high quality and very well polished. Worth every cent. Definitely want to tack weld in a couple spots as the clamps were sufficient enough looking but I don't trust. I'll be keeping these and ending my search..
Hey guys,
I'm about to get rid of my ovals and invest in some quads. For those of you guys that have the 4" quads, how tight are they within the bumper cut out. I've looked at some of the pic's above, but it's hard to tell. I'm just debating on whether to go with 3.5" or 4" will the 3.5" leave a lot of left over space around them?
I'm about to get rid of my ovals and invest in some quads. For those of you guys that have the 4" quads, how tight are they within the bumper cut out. I've looked at some of the pic's above, but it's hard to tell. I'm just debating on whether to go with 3.5" or 4" will the 3.5" leave a lot of left over space around them?
Hey guys,
I'm about to get rid of my ovals and invest in some quads. For those of you guys that have the 4" quads, how tight are they within the bumper cut out. I've looked at some of the pic's above, but it's hard to tell. I'm just debating on whether to go with 3.5" or 4" will the 3.5" leave a lot of left over space around them?
I'm about to get rid of my ovals and invest in some quads. For those of you guys that have the 4" quads, how tight are they within the bumper cut out. I've looked at some of the pic's above, but it's hard to tell. I'm just debating on whether to go with 3.5" or 4" will the 3.5" leave a lot of left over space around them?
12 Second Club
Joined: Feb 2006
Posts: 993
Likes: 3
From: Waukesha,WI
mine are the same way and yea i haven't seen melting on the bumper. and it was strapped on a dyno for some time lol they did get a little warm. i figure if they do start to melt the bumper then i'll trim it since B&B says bumper mod req. lol
i don't know what size they are tho Thanks. If there's any way you could shoot me a couple of pic's that would be great. e-mail is fgreed75@gmail.com
Thanks again
Hi guys for those that had some issues with ssclones I thought I would share my recent experience. I ordered a set of 4" tips from them. They arrived very quickly within a week. That was to Canada too. They look awesome and they are very good quality. I hope to get them on my car shortly. Brian at ssclones was fantastic to deal with. In my opinion his customer service was top notch. I wouldn't hesitate recommending him and his business to others. I will post pics once I get them mounted on my car
