Trans Am Exhaust Tips
Thread Starter
Teching In
Joined: Dec 2011
Posts: 45
Likes: 0
Trans Am Exhaust Tips Hey guys, looked around (admittedly not that hard) for some pictures of different exhaust tips on TAs.
I bought the car with the long and skinny ovular GMMG ones but I hate them, they look like stock camaro tips.
Can't decide between single or dual tips, if you could post some pictures and say what they are/where you got them that would be great.
I bought the car with the long and skinny ovular GMMG ones but I hate them, they look like stock camaro tips.
Can't decide between single or dual tips, if you could post some pictures and say what they are/where you got them that would be great.
TECH Fanatic
Joined: Jan 2011
Posts: 1,358
Likes: 0
From: Michigan
My duels with quad tips are in the process of going on over these next couple weeks..Had single tips....but lots have single tips. and it leaves too much space.....Quads fill in the TAs bumper better than singles... looks more customized and meaner...go quad 3 or 3.5"
You definitely didn't look hard. There are tons of threads on this. Oh, and those gmmg tips are somewhat desirable. You could probably trade them for just about whatever you want.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Just got these in the mail today. Black powdercoated T304. I have a bad rubber hangar on the left side so I was able to slip the tip right where it should be welded and sure enough, it filled in the outlet much better than my stock ones. And TBH the oval outlets aren't too drastic, but give an echo of the stock look (while hiding slightly in my CETA blackout).
Last edited by Zabo; Jan 4, 2012 at 09:09 PM.
im going to buy the corse clones 4" and paint them flat black and put them on my ride. Probably not everyone's taste but havent seen corsa clones painted flat black myself although im sure there some out there.
Good luck with that. What the others have neglected to mention is that the corsa clones are impossible to find right now. I've been trying to get a 3.5" or 4" set for a while now.