Tail Light concepts 98-02 Firebird Trans Am
#421
Not without the honeycomb applied. I don't see it as being picky - I think a lot of us are fine with doing the lenses ourselves (separating and re-applying)..however the honeycomb I definitely am not interested in doing myself. Too many things to go wrong that will go wrong for me...I can't even apply a screen protector correctly. Basically getting something under it then it peeling off, putting it on crooked, a piece not sticking, etc. Not okay with that personally. But +1 for stepping up of course.
All you have to do though is apply it just like tint. Get some dish soap (small amount) in a squirt bottle, add water, spray onto lens, apply, slide around however you need to (if you applied wrong the first time) and squeegee...
#422
I personally like the clear idea... opens up alot of possibliltys for everyone... i say yall jump on the band wagon and let the true f-body pros get it done since the other dude seems to have disapeared. 6le for the win!
#423
Thank you for steping up. If I had the skill/confidence I'd pay but I wont risk a good honeycomb set. Good opportunity for someone who has the skill/time to make these.
Anybody out there need a job/money.
Anybody out there need a job/money.
#429
#431
Time to put your money where your mouth is ...
https://ls1tech.com/forums/appearanc...l#post17887605
This thread is 22 pages long... If there is any REAL interest we should hit our ten by the end of the month no problem, if not, we're cancelling the project.
https://ls1tech.com/forums/appearanc...l#post17887605
This thread is 22 pages long... If there is any REAL interest we should hit our ten by the end of the month no problem, if not, we're cancelling the project.
#435
I want to know a price for a ready to Install pair-cores
#436
So...
$300 for the lenses
$40 for the vinyl
or $400 for the lenses with vinyl installed.
Local guy who used to do our lights said he'll install the lenses for $200. So, pricey but for those who want to spend $600 turn key... you have to mail your lenses in first though, obviously we have no cores, lol.
#437
The vinyl.
So...
$300 for the lenses
$40 for the vinyl
or $400 for the lenses with vinyl installed.
Local guy who used to do our lights said he'll install the lenses for $200. So, pricey but for those who want to spend $600 turn key... you have to mail your lenses in first though, obviously we have no cores, lol.
So...
$300 for the lenses
$40 for the vinyl
or $400 for the lenses with vinyl installed.
Local guy who used to do our lights said he'll install the lenses for $200. So, pricey but for those who want to spend $600 turn key... you have to mail your lenses in first though, obviously we have no cores, lol.
#438
I want to see a complete set 1st & then decide if I want to buy them. I have 2 Trans Am's, so I would want a complete set for both that I can just Install. I don't want to deal with installing the vinyl.
I sent Klearz a message on Facebook, Doesn't look like this is going to happen with him. His response.
"Still sitting on the shelf. Too busy with other projects right now. I'll make a decision in early Jan in regards to carrying on with the project or not. It is a massive time and financial investment."
I sent Klearz a message on Facebook, Doesn't look like this is going to happen with him. His response.
"Still sitting on the shelf. Too busy with other projects right now. I'll make a decision in early Jan in regards to carrying on with the project or not. It is a massive time and financial investment."
#439
Bump it up.
Has anyone bought the clear lenses yet? I want to do a set, but I'll have to pick up a set of 93-97 tails... Im not messing with my stock honeycombs.
Heres a question: Does the vinyl install on the inside or outside of the lense? I'd be afraid of something knicking the vinyl if its on the outside.
Has anyone bought the clear lenses yet? I want to do a set, but I'll have to pick up a set of 93-97 tails... Im not messing with my stock honeycombs.
Heres a question: Does the vinyl install on the inside or outside of the lense? I'd be afraid of something knicking the vinyl if its on the outside.