The Mighty Texan

iTrader: (4)

^No joke, Or idle issues or more potholes in your town, etc lol.

I like that one you made RPD, looks good in there.

tatertot91

iTrader: (41)

I always liked the slp leather *****, the ss **** i have is smaller than the hurst ***** i've tried using so i like it a little better. Also should have a gripper **** on the way soon so i'll post some pics up when it arrives

Wicked-1

I like this one a lot.

agressive

iTrader: (1)

How did u do it to make it fit?

Sail Hatan

Here's mine...

greenvortec97

iTrader: (1)

build thread on this? I'd like to get this shifter for my trans am

Pewter Lurch

Bad ***. Once i start getting all my stupid problems fixed them i will be getting something like this

2000ssowner

The C6 shifter

Ozzy16

Hurst Classic...wouldent switch for anything but the similar style shift **** except with the firebird on it forget the brand name but they dont exist anymore.

Sail Hatan

Anyone whos curious about my shifter, its just the ws6 store adapter, hurst handle, and I cut the stick down roughly an inch and a half. be careful not to cut too much off the plastic piece, and use a dremel to extend the slots in the shifter. it was actually pretty simple, and it looks 1000 times better. I also used a prand prix boot.

LopeyZ

iTrader: (2)

I have the factory Hurst **** but actually like feel of the old round leather wrapped **** that came out in the LT1's. They have seemed to have disappeared though... haven't seen any on Ebay in a while but plenty of Hurst *****.

TyCZ28

I like the Mallory Billet style ones... was too much work trying to find any left so i got one and had a batch CNC machined exact copies from 6061 billet aluminum... now im sitting on like 8 of these hahaha i ned to post them for sale on here but im too lazy

Coppertone

Where did you guys get the GTO **** from? Will it bit on a MGW shifter?

Blownbayou

iTrader: (7)

Hurst cue ball

themealonwheels

iTrader: (20)

I've been through WAY too many, but I've finally found a favorite...

US_Army_Z28

iTrader: (3)

Buy an MBA adapter, that's your build thread lol, I used to ha e the same thing in my car then the adapter just snapped in half one day, now I have a factory trans am auto shift handle

tmurph01

iTrader: (1)

+1 for pool *****.

Here is mine. 13 is my lucky number. Just the right size and feel IMO.

Toronto LT1

iTrader: (2)

silverWS.6

iTrader: (1)

Any word on these?

dr_whigham

iTrader: (49)

For those of you asking about the GTO ****; If you have an MGW, or are getting one, get the other shaft instead of the stock FBody thread. I think the other one is the Vette thread?

I bought it like that bc I was originally going to go with the Ripper ****, as it's still one of my favorites.