hids
Thread Starter
TECH Enthusiast
iTrader: (6)
Joined: Mar 2003
Posts: 612
Likes: 0
From: Irving Tx 75060
hids So I installed the HIDS from Xentec this weekend and the install went smooth and they look great. One problem I have encountered is that when I unlock the car with the FOB, the head lights pop up and then back down. They did not do this before the HID install. Also, when I turn on JUST the fogs, the head lights pop up and stay up but the lights are not on...until I flip the switch to the on position.
Has anyone encountered this? What's the fix?
Has anyone encountered this? What's the fix?
https://ls1tech.com/forums/pontiac-f...s-go-here.html
Sounds like you should have changed the gears while you had them all apart.
Sounds like you should have changed the gears while you had them all apart.
Thread Starter
TECH Enthusiast
iTrader: (6)
Joined: Mar 2003
Posts: 612
Likes: 0
From: Irving Tx 75060
https://ls1tech.com/forums/pontiac-f...s-go-here.html
Sounds like you should have changed the gears while you had them all apart.
Sounds like you should have changed the gears while you had them all apart.
check your alarm programming setting this might help
http://www.ls1.com/forums/f50/alarm-...changes-18690/
if this dont work check your gears if there strip just flip em 180 and they will work aslong as they havent done this to them
http://www.ls1.com/forums/f50/alarm-...changes-18690/
if this dont work check your gears if there strip just flip em 180 and they will work aslong as they havent done this to them
