exhaust browning bumper
05-25-2012, 04:28 PM
#1
10 Second Club
Thread Starter
iTrader: (19)
Join Date: Sep 2010
Location: Carbondale, PA
Posts: 250
Likes: 0
Received 0 Likes
on
0 Posts
exhaust browning bumper Hey guys I have noticed lately that the bumper is browning/burning wear the exhaust tips exit under the bumper. The tips arent touching or super super close to the bumper so it is getting air around it. Just wondering what I can do to stop this from happening.
05-25-2012, 05:18 PM
#2
what exhaust, how much HP, are you running nitrous, methanol, what are your AFR's like?
Depending on how rich your exhaust is, you might be getting intermittent flames out the back with that 427.
you need to buy some heat wrap or stick on heat shilding. Check out "Heatshield Products"
Depending on how rich your exhaust is, you might be getting intermittent flames out the back with that 427.
you need to buy some heat wrap or stick on heat shilding. Check out "Heatshield Products"
05-26-2012, 10:54 PM
#3
Cut the outlet pipes just an inch or two past the hangers, clamp on some $12 dumps from the parts store, and either run no tips or PM me and I'll show you how to dummy-mount the tips for under $20. Tips stay clean and adjusted and no more melted/burned bumper
