i wanted to get the bolt kit from yofab but i couldnt bring myself to spend $200 on bolts.. so i went through and got all sizes i needed and ordered from fastenal.. even got more than what their kit supplies.. installed today.. i am still gonna polish them up.. but here are the results, i am gonna order some bigger washers bc the ones i got were just alil to small.. and this cost about $40 shipped!!!

 

i know i need to get in there and clean up and paint a few things..

 

Looks good! Another thing I would do is paint that dull grey plastic support piece by the hood latch to match your car. I would think about painting the windshield wiper reservoir as well!

 

thanks!! One step ahead... i took grey piece off and painted it.. but i painted it satin black.

 

I think as long as it's not that dull grey color it would look great! Black is a great color choice lol

 

Looks good Dude!

 

thanks .. i have a list of part numbers if anyone else is interested... just pm me

 

Sent you a pm

 

Also got my own from local hardware, make sure and use anti-seize with stainless fasteners looks good!!!!!

 

Sure you don't mean (Blue) "Thread locker" by Locktite?

 

i used anti-seize

 

anti seize keeps stainless/metals from corriding and making it hard to get out when you go to remove.

 

Can someone post up the material list for this?

 

got them at fastenal.com


the first number is part number and second number is quanity

MB2550020A20000 10 M6-1.00 x 20mm ISO 7380 Class A2 Stainless Steel Button Socket Cap Screw

MB2550025A20000 20 M6-1.00 x 25mm ISO 7380 Class A2 Stainless Steel Button Socket Cap Screw

MB2550030A20000 4 M6-1.00 x 30mm ISO 7380 Class A2 Stainless Steel Button Socket Cap Screw

MB2550016A20000 2 M6-1.00 x 16mm ISO 7380 Class A2 Stainless Steel Button Socket Cap Screw

MW6380000A40000 16 M8 DIN 125 Stainless Steel A4 Flat Washer

MN2580000A40000 8 M8-1.25 DIN 934 Finish Stainless Steel A4 Hex Nut

MB2580020A20000 10 M8-1.25 x 20mm ISO 7380 Class A2 Stainless Steel Button Socket Cap Screw


these are the washers i got that are a bit to small.. they work good for some holes and not on some.. i would order one set of these and one set of the ones below

11101239 1 6mm Fender Washer Package DIN 9021 A2 S/S (18-8) 18mm OD

71212 25 1/4" x 1.000" 18-8 Stainless Steel Fender Washer

 

the big washers i used on my hinges i had so i didnt have to order them

 

That is one clean motor!

 

Thanks for postin up the sizes.

 

yep, no problem.. ill post up new pics after im done polishing all the hardware... looks a lot better polished

 

sick man. what intake is that?

 

I really need to do this.