WS6Dream

iTrader: (7)

Bought the onyx stainless emblems from emblempros, but seem to have misplaced my installation instructions. I have searched on here, google, and their website and can't find any instructions posted.

Anyone want to point me in the right direction? Maybe I just can't find it and you can give me a link?

Thanks

Super-Bat

iTrader: (38)

Clean area, remove adhesive protector to expose double sided tape and stick in place?

crimson_bird

iTrader: (4)

^that. just clean it with some soap/water, and then give it a final wipe down with some alcohol. then you're good to go. Be careful when installing and make sure you line them up right.

Firebirdmuscle

iTrader: (16)

Clean with a rubbing alcohol first, don't use soap and water as soap leaves behind a film, make sure it's not cold out when you put them on it needs to be warm. I used a hair dryer to heat the adhesive up, pull the red tape off, heat up and put in place. Bam there ya go

WS6Dream

iTrader: (7)

Thanks. Ya it seems like something easy lol but I was sure that I needed to clean it with alcohol first, that was mainly what I was wanting to confirm.

ramairetransam

iTrader: (18)

jack the back up so its easier to work and just take your time .