Chevyguy2001

From Afterthoughs auto......I went to put the one the drivers side and its really tough getting them to fit. its like they wont snap into place. Any help is needed.

Burken01

iTrader: (88)

post pics!

They should just snap in, make sure nothing is in the way of the clip that snaps on the engine...

Chevyguy2001

It just seems that something is holding back.

Blownbayou

iTrader: (7)

had the same prob..... you have to move/bend a bracket near the back of the fuel rail.

Chevyguy2001

I removed the bracket. Still it doesnt seem to fit..like it being held up by the fuel lines

jrpimp00

iTrader: (17)

Post pics for any real help

ls1owner4life

iTrader: (17)

There is a valve with a green cap in one of the fuel lines. I had the same problem and got fed up so I sold the covers. Try rotating it. When I removed them I saw what was preventing the front clip from snapping in. There is also a EGR hose in the back going into a metal pipe that you can bend. Put wire loom over the fuel lines and they will look nice. Good luck.

Burken01

iTrader: (88)

Did you get it fixed? I was thinking of purchasing some from afterthoughts.....

LOHRTBT

iTrader: (12)

I want some but I dont want it to say 5.7 on it.

Chevyguy2001

havent tried since it got cold again..(20 degrees and non heated garage)

DeLaRosa25

iTrader: (10)

They will fit..Just need to have patience and rotate a bit

buellxb12s

iTrader: (9)

Lohrtbt I'm in the same boat as you. Like then clean with nothing on it.