help with choosing led bulbs
#1
On The Tree
Thread Starter
iTrader: (6)
Join Date: Jun 2008
Location: Long Island, NY
Posts: 120
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Ok, going to take the leap and do led bulbs on my 2000 WS6. I'm going to do the back first. I'm thinking of getting them from sbl what are the model numbers for the bulbs?
I checked the site but was a little confused. They were showing a few bulbs for each item.
I checked the site but was a little confused. They were showing a few bulbs for each item.
#4
On The Tree
Thread Starter
iTrader: (6)
Join Date: Jun 2008
Location: Long Island, NY
Posts: 120
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I'm looking to do 3rd brake light, reverse lighs, taillights and the license plate lights. Also I saw the post about the foot well lights I am thinking about those once I start inside the car.
thanks for the assist.
thanks for the assist.
#5
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
if your ordering from superbrightleds, just type the stock bulb number in the search bar. license plate is 194. 3rd brake is 921. reverse and tails depends on the sockets your car has, if they are twist in style they fit 2157 bulbs, if they are wedge style they fit 3157 i believe. Although leds in the tail lights will be dimmer than stock and it might be unsafe. for the footwell courtesy light i used 9.5 inch strips.
#7
Trending Topics
#8
On The Tree
Thread Starter
iTrader: (6)
Join Date: Jun 2008
Location: Long Island, NY
Posts: 120
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
That's kinda why I was asking about which bulbs to get. I was concerned about the light being too dim as well. I figured someone has done this all ready and know which bulbs to get.