Blownbayou

iTrader: (7)

Where did you guys ground the little wire on the driver side fender???? Looks like I can use the abs bracket, but would like to see what others have done.

Thanks

babbage1109

iTrader: (11)

I drilled a hole under the fuse boxes and screwed it in there

Blownbayou

iTrader: (7)

will move later... thanks

NatesHawk

There's a ground on the inner side of the subframe rail right behind the radiator.. I relocated both the ground off if the fender and the ground from the core support down to it, mounting all the grounds to the same point.. 4k miles ago no issues.. Was easier to do with the nose of the car in the air tho, had it up pulling the air pump off.. One of those while I'm here moments...

skopers3

iTrader: (3)

i used the ABS bracket. No issues.

Majestic9C1

iTrader: (19)

I used a pre-existing stud on the core support and used a castle nut I had laying around to secure it..

99WS6MAN

iTrader: (2)

1964_442

iTrader: (5)

i did use an existing hole , use a new bolt and nut .. pic added

Wicked 94TA

iTrader: (5)

I saw someone hide the ground wire and put a nice stainless hex head bolt with a bowtie engraved on the head in the hole. Anybody seen them and know where to get them?