Fotis

iTrader: (2)

so i have a 2001 Camaro and its got cloth manual seats. I have been trying to replace them with leather seats from a Camaro or TransAm, only thing is that most of them have power controls.

so my question is how hard would this be to add power seats to my car?

Do i just bolt them up and plug them in or do i need to run wires for them?

I've searched but haven't found and real answers. Any gurus out there that can help me?

Daniel Richards

iTrader: (1)

if memory serves the wiring is tucked under a slit in the carpet, so just yank the old one, set new one in place, plug up and bolt down.

it's been like 9 months but I seem to remember there being wires there. also keep in mind only the driver seat is powered.

96lt1m6

iTrader: (31)

Mine was under the carpet, the entire swap was roughly 10 minutes.

vikingramair

This is what you need, 2 seats and a harness in between. I dont know if you have the +12 feed coming from car under you driver seat, orange and black wires?

ajzcamaro

iTrader: (2)

I know my 94 Camaro had manual seats but the wire harness connector was underneath a slit in the carpet. Never actually plugged up so it to see if it worked or not though.

Fotis

iTrader: (2)

Hey thanks got that what I needed anybody know of any good seats I could find around Georgia