New product... What do you want to see?
#61
Thread Starter
Banned
iTrader: (56)
Joined: Jul 2004
Posts: 12,637
Likes: 3
From: Valley Village, CA
I would love a set of these that will work with the LS1 coil packs, and fit under the f-body cowl. http://www.holley.com/242-1.asp
Also x2 on the vent rings, but I would prefer brushed to chrome.
Also x2 on the vent rings, but I would prefer brushed to chrome.
#64
Thread Starter
Banned
iTrader: (56)
Joined: Jul 2004
Posts: 12,637
Likes: 3
From: Valley Village, CA
How about a better designed steering wheel with airbag.
I hate the stock steering wheel and all aftermarket wheels have no airbag.
I would like to see cleaner and sleeker audio controls as well.
Custom color wrap and LED lights for the audio controls.
Maybe an inch smaller than stock.
Seems like alot of work but it would be nice and I think alot of people would want it. Maybe use some corvette steering wheels of late.
I hate the stock steering wheel and all aftermarket wheels have no airbag.
I would like to see cleaner and sleeker audio controls as well.
Custom color wrap and LED lights for the audio controls.
Maybe an inch smaller than stock.
Seems like alot of work but it would be nice and I think alot of people would want it. Maybe use some corvette steering wheels of late.
#66
Thread Starter
Banned
iTrader: (56)
Joined: Jul 2004
Posts: 12,637
Likes: 3
From: Valley Village, CA
another thing to think about, the rubber cover under the shift boot, really helps keep noise level and temps low. I was driving without it for about a week, and the noise difference was noticeable. It didnt really bother me, but some people might not like that.
Just some food for thought.
Just some food for thought.
#69
Thread Starter
Banned
iTrader: (56)
Joined: Jul 2004
Posts: 12,637
Likes: 3
From: Valley Village, CA
Ditto the coil pack covers.
Center console molded without cup holder and without flip ashtray.
Return of Carbon Fiber REPLACEMENT interior trim pieces (wish I would've ordered the set 10 years ago when RKSport still offered it).
Strut tower brace to clear FAST 102 intake.
Also ditto the A-pillar pod(s) whole replacement piece.
Center console molded without cup holder and without flip ashtray.
Return of Carbon Fiber REPLACEMENT interior trim pieces (wish I would've ordered the set 10 years ago when RKSport still offered it).
Strut tower brace to clear FAST 102 intake.
Also ditto the A-pillar pod(s) whole replacement piece.
I'll talk to RK and see if they have any of the old molds laying around...
STB we were working on but both cars that were going FAST 102 got wrecked.
Whole replacement is too expensive. No one would buy it.
#72
Thread Starter
Banned
iTrader: (56)
Joined: Jul 2004
Posts: 12,637
Likes: 3
From: Valley Village, CA
ANYTHING FOR A G8
Seriously, there is not much out there for us other than some splitters and mesh grills. If you could make something like an HSV bumper (price it around $700 like a GXP) or just something, you may get lots of interest.
Quite possibly even this (half GXP, half HSV bumper)
Seriously, there is not much out there for us other than some splitters and mesh grills. If you could make something like an HSV bumper (price it around $700 like a GXP) or just something, you may get lots of interest.
Quite possibly even this (half GXP, half HSV bumper)
HOOD: Possibly cowl, possibly cowl with ram air retained, MOST LIKELY Shaker
BUMPER: I like the one you posted
SPLITTER: Will be done as soon as my Grand National is off the lift.
GAUGE OVERLAYS
GAUGE PODS: Looking at a few options.
SPOILER: McNord style
All final decisions on what we make our my partner Gil's (RaptorWS6) since it is his $30,000 car lol!
#73
Thread Starter
Banned
iTrader: (56)
Joined: Jul 2004
Posts: 12,637
Likes: 3
From: Valley Village, CA
I also second the return of the 6le seats, they are by far the best looking. Whenever a set shows up for sale nobody ever wants to ship. Why were these ever discontinued?
At trans am nationals I seen a carbon fiber upper center counsel cover with the pontiac emblem in it and it covered the ash tray and cup holder and it looked amazing.
How about some kind of replacement center counsel lid? They always get worn out and show their age when they sag and flare out on the driverside.
At trans am nationals I seen a carbon fiber upper center counsel cover with the pontiac emblem in it and it covered the ash tray and cup holder and it looked amazing.
How about some kind of replacement center counsel lid? They always get worn out and show their age when they sag and flare out on the driverside.
Console addressed...
They make a cover for the console which is a nicer leather through Red Line (I think they're still a sponsor)...
#75
Thread Starter
Banned
iTrader: (56)
Joined: Jul 2004
Posts: 12,637
Likes: 3
From: Valley Village, CA
FYI on a sale... no large demand for one thing so I just marked EVERYTHING 10% off (just enter code XMAS10 when you check out)...
That means roofs, which are ALREADY marked down $100-$300 this month are ANOTHER 10% off...
Actually, there's a lot of items already marked down this month (due to vendors giving us end of the year deals) and they ALL are set up so the code applies to them for ANOTHER 10% off...
This is the first time we've done EVERYTHING. Some of the items we only make 10% on (through other vendors, UMI for example) so some you're getting AT COST (so please by some of the stuff we make as well, lol)!!!
That means roofs, which are ALREADY marked down $100-$300 this month are ANOTHER 10% off...
Actually, there's a lot of items already marked down this month (due to vendors giving us end of the year deals) and they ALL are set up so the code applies to them for ANOTHER 10% off...
This is the first time we've done EVERYTHING. Some of the items we only make 10% on (through other vendors, UMI for example) so some you're getting AT COST (so please by some of the stuff we make as well, lol)!!!
#76
And the center cousel lid, the leather cover doesn't change the fact that the original piece gets worn down underneath and sags. And plus this would be a universal piece for both the trans am and camaros.
#77
Thread Starter
Banned
iTrader: (56)
Joined: Jul 2004
Posts: 12,637
Likes: 3
From: Valley Village, CA
Unfortunately both pieces you're talking about would require injection molding. We MIGHT be able to make a plastic cover that snaps over the existing console but still not sure what design would work and please everyone...
#78
Make one with a pontiac arrow and one with the camaro shape emblem that is on the front nose piece
#80
How about an instrument panel blank for installing aftermarket gauges in 1993-1996 Camaro dashboards? You already make them for 1997-2002 Camaros. Hell, if you could make them with the holes already in them that would be even better!