Double Din Radio Install
05-07-2014, 08:27 AM
#21
On The Tree
Join Date: Jun 2013
Posts: 116
Likes: 0
Received 0 Likes
on
0 Posts
I tryed to made mine as an Experiment.. It took me over a Month to do it.. "right"
At the end I give up and just bought one from a guy that sell the kit with everything you need to install the radio
At the end I give up and just bought one from a guy that sell the kit with everything you need to install the radio
08-27-2014, 01:56 PM
#22
Teching In
Join Date: Nov 2006
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
mass produced double din I bought a generic kit from best buy. then I cut, drilled, added spacers, etc. until it fit correctly. To my knowledge, there's no off the shelf kit that will fit without any modification.
I also had to cut some plastic off the back of the slot where the radio goes. the OEM head unit was shorter than my DD aftermarket. hope this helps! I have pictures if you need them.
I also had to cut some plastic off the back of the slot where the radio goes. the OEM head unit was shorter than my DD aftermarket. hope this helps! I have pictures if you need them.
actually metra makes a complete bezel replacement you can get on ebay for 53bux. Metra has a video on youtube showing it installed with a radio looks like a factory fit just ordered one with a Pioneer bluetooth double din radio. Metra Kit is 99-3311b comes with the bezel and mounting plates for the radio to bolt in like stock. retail is around $90 gotta love ebay.
