ash tray switch panel
ash tray switch panel Anyone know where I can find a nice switch panel to ge where my ash tray is(98 trans am) for a fan switch and maybe one other switch. It can come with switches or without. I did a search but mostly found nitrous setups. Thanks.
TECH Fanatic
Joined: Aug 2003
Posts: 1,010
Likes: 0
From: Winchester, VA
The NX switch panel would work. Yeah its made for nitrous, but it can power anything you want. All it takes is for you to wire power to the switch, and then the fan to the switch. Plus it fits in the cubby hole next the the cig lighter, and flows with the interior and imo it looks like it was ment to be there.
Fry
Fry
http://www.jimmy-jams.com
That's where I got mine, pics on my website in the sig. It's a quality piece and they have excellent customer service.
Happy driving !
Bad30th
That's where I got mine, pics on my website in the sig. It's a quality piece and they have excellent customer service.
Happy driving !
Bad30th
Originally Posted by Bad30th
http://www.jimmy-jams.com
That's where I got mine, pics on my website in the sig. It's a quality piece and they have excellent customer service.
Happy driving !
Bad30th
That's where I got mine, pics on my website in the sig. It's a quality piece and they have excellent customer service.
Happy driving !
Bad30th
thanks Those are some pretty nice pieces, are the rocker switches light up when active or not, and are they three position rocker switches or just 2. The fan switch requires a stock position, low, and high. I wounder if he would make one with just 2 rocker switches. Thanks for the info.
Originally Posted by DreamState23x
Those are some pretty nice pieces, are the rocker switches light up when active or not, and are they three position rocker switches or just 2. The fan switch requires a stock position, low, and high. I wounder if he would make one with just 2 rocker switches. Thanks for the info.
Trending Topics
I made my own out of 1/8 inch sheet steel from Lowes 6.99 I have a template that I could outline and email to you if you want to cut out your own. It easy took about an hour from start to finish paint included. Pm me for pics if interested.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Originally Posted by craiG's SS
You can also just get a small peice of aluminum, and go to radio shack and get you some swtiches, and u are in business!
thats what i did. took some thin aluminum and put in my own switches and lights that i got from a local electrical part supplier 
Launching!
Joined: Jan 2004
Posts: 223
Likes: 0
From: Kings park New York
I had holes drilled into my ashtray for the linelock and low speed fan control switch then I am debating when/if I get nitrous putting the switches on the side of the seat, not really a sleeper look but very clean look.
