whick of u guys has the best motor bay???
#43
Originally Posted by 1 BLOWN V8
I have heard that you could run into problems with the fuel rail covers if you had headers. If so how did some of you fix that?
#44
Reroute the wiring harness (Wire mod, sticky at the top of the forum) for getting rid of the wires.
I just put heat tape on the underside of my covers too. No problems yet. Had them on for several months now.
I just put heat tape on the underside of my covers too. No problems yet. Had them on for several months now.
#49
Originally Posted by FIREHAWK#608
Thanks for the compliments. When I get stressed out over something I open the garage door and just stare at the engine for about 15 minutes going through a couple beers and it works!
P.S. Your engine bay is gorgeous.
#50
Originally Posted by Moparnos (The SLP Guy)
well here's mine nothing special
wow bet allot of local street racers were waiting for this
wow bet allot of local street racers were waiting for this
#53
Originally Posted by kyles2000z
the paintwork i kinda sloppy, i'ts all gettin redone with a spray gun this winter.
where'd you get all that purdy carbon fiber stuff...im pretty sure everything is wondering?
#54
i boughta sheet off of ebay that was like 8 inches X 2 feet for about $35 and just cut it out myself. its so thin you can easily cut with a pair of scissors, wasnt quite as thick as i had expected. i recommend it tho, real easy to do. they're secrured with velcro and i just bought little dcals to put on em to dress em up a little.
#55
Originally Posted by kyles2000z
i boughta sheet off of ebay that was like 8 inches X 2 feet for about $35 and just cut it out myself. its so thin you can easily cut with a pair of scissors, wasnt quite as thick as i had expected. i recommend it tho, real easy to do. they're secrured with velcro and i just bought little dcals to put on em to dress em up a little.