Z06 style LS1 emblems
Originally Posted by Havok2
camaroboy: how much are those? i want some for my rear window..pm me.
If you guys really like these laser stainless pieces make sure to keep bugging Tony. If he gets enough positive feedback, he wont hesitate to have a bunch of them cut out. 
And remember these can be polished too.
And remember these can be polished too.
As promised I went out to see how long it would take to polish one of these stainless steel emblems. I spent less than 2 minutes on the Kozaks emblem. I put a little bit of Mothers on a rag and wiped BY HAND and 2 minutes later you can see your reflection in emblem.
So my conclusion is that I disagree with what dragonZ28 said. These CAN be polished within minutes by hand. If you had a buffer wheel or dremel I would bet it would take less than a minute. I can prove this on video if necessary on one of the LS1 emblems.
So my conclusion is that I disagree with what dragonZ28 said. These CAN be polished within minutes by hand. If you had a buffer wheel or dremel I would bet it would take less than a minute. I can prove this on video if necessary on one of the LS1 emblems.
Originally Posted by CAMAROBOY69
As promised I went out to see how long it would take to polish one of these stainless steel emblems. I spent less than 2 minutes on the Kozaks emblem. I put a little bit of Mothers on a rag and wiped BY HAND and 2 minutes later you can see your reflection in emblem.
So my conclusion is that I disagree with what dragonZ28 said. These CAN be polished within minutes by hand. If you had a buffer wheel or dremel I would bet it would take less than a minute. I can prove this on video if necessary on one of the LS1 emblems.
So my conclusion is that I disagree with what dragonZ28 said. These CAN be polished within minutes by hand. If you had a buffer wheel or dremel I would bet it would take less than a minute. I can prove this on video if necessary on one of the LS1 emblems.
Check out these finishes - I promise this can not be accomplished with Mother's products because I have tried, and the finish looks bad compared to other polishing methods. And this does not take 5 minutes.
Last edited by dragonZ28; Feb 18, 2006 at 02:18 PM.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo Tony mentioned a great idea for these laser emblems. He mentioned having the "L" cut out and kept so that it can be painted. I could easily copy the same "L" and just send it with all of the emblems so that if anyone wanted to paint it they could. Then it could just be put back into the emblem when it was placed onto the car.
Originally Posted by Darkspoon
Make these please!!!https://ls1tech.com/forums/appearance-detailing/420929-z06-style-ws6-emblems.html
https://ls1tech.com/forums/appearance-detailing/422243-any-interest-2006-z06-style-ws6-emblems-here.html
https://ls1tech.com/forums/showthread.php?t=445551
https://ls1tech.com/forums/showthrea...+style+emblems
Last edited by BLOODTA; Feb 19, 2006 at 12:35 PM.
I just got the quote back from the laser guy and the prices are by far the cheapest I have seen anywhere. I have even better news. He has a machine that he can throw the emblems in that gets rid of any burn marks and completely smooths out any rough surfaces. More good news. Any of these emblems can be polished on a buffing wheel to complete mirror,chrome looking results in 5 minutes with Mothers. Dont bother arguing with the polishing part because its soo easy to polish these its rediculous. 
Now its all in Tonys (Nine Ball) hands. If he likes the price then they will be up for sale. After that I can make any emblems you want for the same price. LS1, LS2, Z28, WS6, WS7, WS9, ZO6. ANYTHING of that same size!!!!!
I am also having all the "L" pieces cut out separately so they can be placed back into the emblem or left out.
If you like the way they look in post #39 then you will really like the way they look now.
Now its all in Tonys (Nine Ball) hands. If he likes the price then they will be up for sale. After that I can make any emblems you want for the same price. LS1, LS2, Z28, WS6, WS7, WS9, ZO6. ANYTHING of that same size!!!!!
I am also having all the "L" pieces cut out separately so they can be placed back into the emblem or left out.
If you like the way they look in post #39 then you will really like the way they look now.
Last edited by CAMAROBOY69; Mar 16, 2006 at 02:48 PM.
Tony(Nine Ball) gave me the Ok to have these cut out so they can be purchased. The first set of emblems will be the Z-LS1. I am also shipping the cut out "L" with the emblems for those members that want to paint the "L" or whatever you want to do with it. I will get new pics when they get cut out.
The first set of emblems will be the Z-LS1. I am also shipping the cut out "L" with the emblems for those members that want to paint the "L" or whatever you want to do with it. I will get new pics when they get cut out. 23 of these Z-LS1 emblems are shipping out tonight to Tony. 2 of them are going on my 69 Camaro. I wont post pics until Tony receives them that way I dont spoil his surprise. They look better than the pics in post #39.
I wont post pics until Tony receives them that way I dont spoil his surprise. They look better than the pics in post #39. 
Originally Posted by 2000 Tran Zam
hmmm, can you do a turbo ls1 emblem that I can put on my both sides of my ws6 hood and replace the text that says "ram air"?
Shoot me a PM if your interrested. You would be the first one with them since its your idea. 
