Post pics of CME setup
Originally Posted by MeentSS02
CCW SP500s...think of them as IForged Aeros, only without the rivets, and cost about $200 less (for the entire set of 4, not each 
)
)
Originally Posted by Z'mnypit
The valance looks good, but whats wrong with your tips? they look like they are to far back.
im getting ready to totally redo my exhaust from headers all the way back and had planned to get this set up to begin with because it looks so incredible good on our cars but i might go up to 4' into the muffler then down sizing to the proper size going into the tips and would like to know before i get started.
Originally Posted by 1999 SS
can anyone tell me what size the inlets are on these tips.
im getting ready to totally redo my exhaust from headers all the way back and had planned to get this set up to begin with because it looks so incredible good on our cars but i might go up to 4' into the muffler then down sizing to the proper size going into the tips and would like to know before i get started.
im getting ready to totally redo my exhaust from headers all the way back and had planned to get this set up to begin with because it looks so incredible good on our cars but i might go up to 4' into the muffler then down sizing to the proper size going into the tips and would like to know before i get started.
2.5" if its the SLP tips
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Originally Posted by SIK02SS
my inspiration....
but i'm not done yet, just got out of the body shop:
(parked on a steep driveway)
and the tips for 3" TDs over axle:
but i'm not done yet, just got out of the body shop:
(parked on a steep driveway)
and the tips for 3" TDs over axle:
TECH Enthusiast
Joined: Mar 2003
Posts: 740
Likes: 0
From: Pearland, Texas
Originally Posted by 6SSPEED
Teri, Nine Ball, TS99V6 or anyone else for that matter----I would really like to see an underside shot of yall's setup. Please post up!!!
ok, so a while back i had a few people who asked about the exhaust tips i got...well, 2 months later (maybe more?) i finally got my TDs re-done.
its 3" over the axle w/x-pipe and bullit mufflers (14" i think?):
ENJOY
and heres a video soundclip...i'll try to get a drive-by one tomorrow if i can:
its 3" over the axle w/x-pipe and bullit mufflers (14" i think?):
ENJOY
and heres a video soundclip...i'll try to get a drive-by one tomorrow if i can:
Originally Posted by 1999 SS
where can i find a vendor of these tips? how much $$ are they? do they come any bigger than 3inch?
Originally Posted by 1SicV8
ebay search for center mount exhaust tips
and i think he only makes them 2.5" or 3"....my 3" are HUGE though
try to say that to a chick!
Flawless. 
Staging Lane
Joined: Feb 2005
Posts: 57
Likes: 0
From: Clifton Park NY
I just took my car in to get another estimate on getting the CME blended...$1200 with absolutely no guarantee that it won't crack the minute I drive it out of the shop. Does anyone out there with blended CME know which products were used on theirs? If so, how durable is it? Thanks in advance