.... 
The TA and GN together..
The TA and GN together.. Pics of both rides, GN should be done in about 2 more weeks it looks like, should have the right combo to hit a 10.50 - we'll see 
http://community.webshots.com/photo/...33848760yskXVq
http://community.webshots.com/photo/...33848760yskXVq
Sweet rides!! Don't see many of the Gold TA's....Maybe the GN is the Ricer's GOD....It probably inspired their minds for having a V6 dominate, only thing they forgot was...It's DOMESTIC lol....
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
I see one gold T/A that looks very nice with C5 Z06 wheels. Then I see another gold T/A that looks even more sexy with C6 Z06 wheels. So which ones are actually on the car? Looks really good either way. Whats being done with the GN? That is one of the nicest cars ever made and called domestic!
Thank you guys very much. I really love the Buick. She's sat for about a year but I have a very experienced Buick guy in OK buidling the new setup. Should be fired up the weekend after this one. He's got a GN that runs 135mph through the 1/4 so I think I'm in good hands
I had only planned on doing a mild stock rebuild so I could run high 11's consistently, but wound up going a little overboard and now it should be able to do mid 10's I think.
Combo is:
GNX dash, .30 over forged TRW's, Billet caps, Champion iron's, beehive springs, T&D Roller Rockers, Comp Cams 206/206 roller, Seiman's 57lb injectors, Eric Marshall chip, PTE FMIC, John Craig TE45A, Jannis tranny, PTS 9x11 3200, THDP, Racetronix 340 kit, OGS Propane, Hooker dual 2.5"
The wheels on the TA in the pic with the Buick is it currently. I sold the C5 Z06's in favor of the C6 Z06's.
I plan on ditching the stock wheels on the GN and getting either Weld Draglite type wheels (common I know, but I have the only GN in the area) or the Bogart D-10 wheels. Not sure yet. Thanks again! Nice shot of the Buick and Z by the way
I had only planned on doing a mild stock rebuild so I could run high 11's consistently, but wound up going a little overboard and now it should be able to do mid 10's I think.
Combo is:
GNX dash, .30 over forged TRW's, Billet caps, Champion iron's, beehive springs, T&D Roller Rockers, Comp Cams 206/206 roller, Seiman's 57lb injectors, Eric Marshall chip, PTE FMIC, John Craig TE45A, Jannis tranny, PTS 9x11 3200, THDP, Racetronix 340 kit, OGS Propane, Hooker dual 2.5"
The wheels on the TA in the pic with the Buick is it currently. I sold the C5 Z06's in favor of the C6 Z06's.
I plan on ditching the stock wheels on the GN and getting either Weld Draglite type wheels (common I know, but I have the only GN in the area) or the Bogart D-10 wheels. Not sure yet. Thanks again! Nice shot of the Buick and Z by the way
