Those with Export Tailights
Thread Starter
TECH Fanatic
iTrader: (21)
Joined: Sep 2003
Posts: 1,490
Likes: 0
From: Chesapeake, VA
Those with Export Tailights I'm finally getting around to installing mine and wanted to know what you used to modify the sockets on the lights in order for them to fit. It looks like it only needs alittle knotch cut out so that they will fit...does that seem right? Thanks guys! 
Trending Topics
Yeah...I pulled the bulb on mine and duct taped over the socket since I couldn't find where the heck my electrical tape disappeared to! I just let it hang behind the light when I put it back in.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo Thread Starter
TECH Fanatic
iTrader: (21)
Joined: Sep 2003
Posts: 1,490
Likes: 0
From: Chesapeake, VA
When I turn on the car, my drivers side turn signal is on in the inside remains lite, even though the light is not on. The drivers side turn signal will not blink, but the passenger side does. When I put my hazards on they blink, but thats the only way. I have all the sockets in the right place and didnt mess with any wires. What could be the issue??
