Bird is finally lit
Thread Starter
Joined: Apr 2004
Posts: 832
Likes: 1
From: Mooresville NC
Bird is finally lit It was lit with 50 some 90k leds Now I have 150 leds and 2 cold cathodes its bright
now if I can seal the plate to the bumper to stop the lite from sneaking out.
now if I can seal the plate to the bumper to stop the lite from sneaking out.
12 Second Club
Joined: Sep 2002
Posts: 597
Likes: 0
From: Tampa
What an awesome idea!! 
That white looks pretty good. I have a red theme going on, but I only needed 7 LEDs and it's still too bright. Did you use the clear cover from Afterthoughts? Try to fashion some sort of gasket for it, like cork or rubber, or even Mr. Gasket. Good job!
That white looks pretty good. I have a red theme going on, but I only needed 7 LEDs and it's still too bright. Did you use the clear cover from Afterthoughts? Try to fashion some sort of gasket for it, like cork or rubber, or even Mr. Gasket. Good job! Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Originally Posted by blown 346
That looks badass, nice work. Now the only bad thing is cops will definetly see no front plate if there dicks.
TECH Fanatic
Joined: Jun 2004
Posts: 1,535
Likes: 1
From: The Houndstooth
Originally Posted by blown 346
That looks badass, nice work. Now the only bad thing is cops will definetly see no front plate if there dicks.
Thread Starter
Joined: Apr 2004
Posts: 832
Likes: 1
From: Mooresville NC
Thanks for the compliments. yes it is the clear one from afterthoughts. i just masked it sanded it primed and painted. Then I layed the bird decal over the clear bird mold and lit it. You would never know by day that its not the original plate. I can post up a write up if anyone likes?
NHRA_Trans_Am I can make you one if you don't wat to try it yourself
NHRA_Trans_Am I can make you one if you don't wat to try it yourself