Rattle can paint results on small interior piece!!!
#1
Thread Starter
TECH Enthusiast
iTrader: (1)
Joined: Dec 2005
Posts: 536
Likes: 0
From: Champaign, Illinois
Rattle can paint results on small interior piece!!!
After listening to some advice from some people, I am painting some extra interior pieces that I have lying around. I am doing the top part of a center console and some other small parts but don't have much time so progress is slow. I was impressed at how well this turned out, coming from a spray can.
I'll be working on the rest this weekend and I'll see how it turns out.
I'll be working on the rest this weekend and I'll see how it turns out.
#3
Looks good man! It took me a long time to get it right. For the larger pieces, just make sure you use a good primer and get it sanded nice and smooth. What brand/type of primer/paint/clear are you using?
#5
I liked the duplicolor high build, if it doesn't build up enough on your console top try rust-oleum automotive primer. That's what I ended up using and I only needed 2 coats to fill in 60grit sandpaper marks. Throw up some pics when you get it done.
#6
Thread Starter
TECH Enthusiast
iTrader: (1)
Joined: Dec 2005
Posts: 536
Likes: 0
From: Champaign, Illinois
I'll try to get some finished pictures up tomorrow. I laid the adhesion promoter, primer, sanded, and laid down color tonight. I'll probably sand now and hopefully will lay clear on tomorrow. Thanks for the comments.