Clear Corners foggy

Reply Subscribe

Thread Tools

Search this Thread

Nov 3, 2006 | 01:49 PM

URNZONEBAIT

Thread Starter

Staging Lane

Joined: Jan 2006

Posts: 82

Likes: 0

From: Gardena, Ca

Clear Corners foggy

Finally put on my halos and clear corners have not had them on for 24hrs and the clear corners are foggy what can I do to fix it ?

Nov 3, 2006 | 02:37 PM

URNZONEBAIT

Thread Starter

Staging Lane

Joined: Jan 2006

Posts: 82

Likes: 0

From: Gardena, Ca

...ttt

Nov 3, 2006 | 03:08 PM

Brian2006

TECH Senior Member

iTrader: (42)

Joined: Dec 2004

Posts: 5,063

Likes: 0

From: Tomball/Nacogdoches TX

Drill holes and add silicone around them. If you have any more questions shoot me a PM. It happened to me also and this fixed it right up.

Nov 3, 2006 | 04:40 PM

URNZONEBAIT

Thread Starter

Staging Lane

Joined: Jan 2006

Posts: 82

Likes: 0

From: Gardena, Ca

drill where ?

Nov 3, 2006 | 04:57 PM

Brian2006

TECH Senior Member

iTrader: (42)

Joined: Dec 2004

Posts: 5,063

Likes: 0

From: Tomball/Nacogdoches TX

Drill 1 or 2 small holes at the bottom of the corners sorry. That way the moisture can drain out and if you want it to drain even faster take a hairdryer and point it toward the opening for the bulbs. It'll eventually clear up. The holes should make it if any moisture gets in there again it'll just drain out but to double check yourself you can add another bead of RTV silicone around the edges of the corner. Mine leaked thru the bulb so make sure you turn it in completely and that it seals.