View Poll Results: Which color temp?
4300k
10
16.39%
6000k
16
26.23%
8000k
30
49.18%
10000k
5
8.20%
Voters: 61. You may not vote on this poll
Post up your HID's
I'm torn between 6K and 8K. All the imports that come with HID's from the factory what do they primarily run? I am talking about the Older 3.5CL's and some Mercedes cause they have HID's in reflector housings.
Originally Posted by Ashish
I'm torn between 6K and 8K. All the imports that come with HID's from the factory what do they primarily run? I am talking about the Older 3.5CL's and some Mercedes cause they have HID's in reflector housings.
has anybody with a bird found a set of projectors that fit length wise in the housing area to where you dont have to cut anything behind it?? i freakin going ot make something up and ill post pics if someone knows of a projector that is a good size to where it overall fits in length, as for around it a base came easily be made for the square shape i think its possible cant hurt to try, and im picky so ill keep on till its how i want it !! anybody let me know on a projector and im going to come up with something on my own for my ride....
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Originally Posted by KILLER-LS1
do you think hid low beams and fogs would be a bit much?
Originally Posted by 02NHRAtransAm
where did u get these at?!?!?
Originally Posted by Tonys99RamAir
Got a sealed beam conversion from EuroLights and then got the HID's from a Sponsor on here, Intensise HID's I think is what it is called.--Tony
so the lower the number the whighter it is? i want it to be bright white, but maybe have a hint of blue in it. so what application would best suit me then? I also want it to crisp too.
what about the fogs, how do i go about that?
what about the fogs, how do i go about that?
what exactly is a sealed beam conversion. sorry for the dumb questions that is how some one learns. And what does the HID kit do?? Who has the best kit here??
What is a better bulb??
H4,H1,H7,9006,or 9005
EDIT: does any one have individual pics of the sealed beam conversion kit and HID kit?? What is the difference?
What is a better bulb??
H4,H1,H7,9006,or 9005
EDIT: does any one have individual pics of the sealed beam conversion kit and HID kit?? What is the difference?
A sealed beam conversion makes it possiable for you to change the bulbs in your headlights, if you notice now on our TA's if your headlight goes out you have to buy a whole new assembly, not just a bulb. You cannot have a HID kit and make it work in a sealed beam housing because there is no way to put a HID bulb in the housing. There are pictures of a sealed beam conversion on the web site I sent you a link to torchd 02 ta. As far as bulbs go, it does not mater what number they are (h1, h2, h7, 9005, 9006, etc) that is just the type of housing they will go into. For example I have H7 bulbs in mine because the light housing will not except any other bulb, one due to the way it fits in and two the way it wires in. Any other questions, just hollar.--Tony
Originally Posted by Tonys99RamAir
A sealed beam conversion makes it possiable for you to change the bulbs in your headlights, if you notice now on our TA's if your headlight goes out you have to buy a whole new assembly, not just a bulb. You cannot have a HID kit and make it work in a sealed beam housing because there is no way to put a HID bulb in the housing. There are pictures of a sealed beam conversion on the web site I sent you a link to torchd 02 ta. As far as bulbs go, it does not mater what number they are (h1, h2, h7, 9005, 9006, etc) that is just the type of housing they will go into. For example I have H7 bulbs in mine because the light housing will not except any other bulb, one due to the way it fits in and two the way it wires in. Any other questions, just hollar.--Tony
So the SBC kit replaces our stock housing right? in this pic
that is a new SBC??? then all you will need is an h1, h2, h7, 9005, 9006 bulb??
What is a better bulb out of all these? h1, h2, h7, 9005, 9006
Yes, I did not get my actual HID's from the company I got the SBC from, just the conversion itself. And that picture is the SBC, and yes all you need to do then is get a H7 bulb to put in there, that is the only one that will work in it. All those bulbs are the same, the only difference if how they fit in the housing, a 9006 bulb will not fit in a H1 housing, etc. For these particular SBC's you have to use a H7 bulb as that is the size bulb that fits in the houing. There is no bulb that is better than the other, they are all the same. The only number you need to worry about it the bulbs color temp, like 8000K, 10000K etc.depending on what color you want your lights to be.--Tony
BTW, its Intense HID that I got the lights from.
BTW, its Intense HID that I got the lights from.
8000k from ledgauges.com 
Last edited by Zangel; Dec 21, 2006 at 11:48 AM. Reason: link not working correctly
Originally Posted by Tonys99RamAir
Yes, I did not get my actual HID's from the company I got the SBC from, just the conversion itself. And that picture is the SBC, and yes all you need to do then is get a H7 bulb to put in there, that is the only one that will work in it. All those bulbs are the same, the only difference if how they fit in the housing, a 9006 bulb will not fit in a H1 housing, etc. For these particular SBC's you have to use a H7 bulb as that is the size bulb that fits in the houing. There is no bulb that is better than the other, they are all the same. The only number you need to worry about it the bulbs color temp, like 8000K, 10000K etc.depending on what color you want your lights to be.--Tony
BTW, its Intense HID that I got the lights from.
BTW, its Intense HID that I got the lights from.
i need to get a SBC kit from eurolights.com, you gave me their addy in a pm. They will send me 2 lenses to replace my stock lenses. They will also give me a wiring kit to plug into my stock wiring harness so that i can convert to an H7 buld. Right so far? Now where do i get the H7 bulb? And where ever i get them from, the temp ranged from like 4300K, 6000K, 8000K to 10000K right?
Now what about heat, will that come into a factor at all? will it melt anything?
What is the difference between 6000K and 8000K i want a nice crisp white light with some blue to it.
Do i want LEDs or HIDs for lights?
What aobut the fogs, how do i achieve that same look?????? will the 8000K match my silverstars that i have in my fogs right now??
anymore help would be great