VIP1

My stock cloth seats are power driver and manual passenger.

parbreak

iTrader: (17)

Are the inserts in the center of the seat removable?

Thanks
Bryan

Hawk108

iTrader: (1)

approx. how much higher do you sit in this seat compared to the stocker? thanks and great write up

6LITEREATER

iTrader: (56)

Yup .

It's kind of hard to judge because the back/bottom of the seat is right where the factory seat sits, then the leg support angles up a good 4 inches from factory... In the end I would say you sit about 2 inches higher AT MOST (I want to overestimate so no one ends up with their head against the ceiling)...

I THINK if you had the Arizen brackets you would sit close to the factory height... Maybe KANDY SS can chime in for us here ...

Hawk108

iTrader: (1)

2" is not too bad but you cannot use the power seats if you use the arizen brackets correct?

BitViper

iTrader: (63)

So what about seating height...I found thet with teh CR1's I actually sat a bit..too high and the amount of "usable" adjustability wasnt worh having them in

How about the arizens on teh electric base

6LITEREATER

iTrader: (56)

Read two posts above yours...

6LITEREATER

iTrader: (56)

Correct.

BitViper

iTrader: (63)

DOH...so just the sam as the CR1's..bummer

I could get the CR1's in the right position but it ended up being all the way down in back and nearly flat in the front

6LITEREATER

iTrader: (56)

Update, been almost a month and I have no bad things to say about the seats! They still look and feel great !

mycamaroSS

iTrader: (4)

dude those are so nice, once i have the money, im gonna get those

z28pat

iTrader: (10)

Great write up,
very through and the pics are great,
will definately use when I get my seats.

pat

530transam

iTrader: (2)

where did you get them? can you pm em the address?......jj lol!! when did you do this write up? was this around when i got my seats and we went back and forth forever? btw i still havnt got the corbeau fbody specific sliders but id like to let everyone know kind of as the fourth option when i get them how they fit in. Cause you got stock, universal, and adapted universal. but you didnt mention fbody specifc pre-fabbed sliders. Im told they make you sit even lower than stock seats ill let everyone know once i get them. I have my lcense suspended till april so im in no rush to get them i cant promise when ill get them

miamifan3413

iTrader: (1)

I just got my seats today......thank God for this write-up, I took my drivers side seat out & was expecting everything to line up....yeah right I'm gonna use my factory sliders because they look a hell of alot better quality than those POS sliders they come with......Factory sliders adjust ALOT further than the one's that came with it also.....thanx for this write-up......anyone that buys these seats will definately appreciate this

z28pat

iTrader: (10)

I see that the center insert is removable, how is it held in place?
I ask because I found some inflatable lumbar support bags that you can put in your seats and I would love to do this when I get my seats,

again, great write up!

pat

6LITEREATER

iTrader: (56)

It's not really removable (it's sewed in) but it's VERY easy to pry it forward enough to work behind it (that's how I added my lumbar)...

themadspoon

iTrader: (7)

Wow that looks really good!

angrychicken

indeed these are great seats especially for the price of them.

z28pat

iTrader: (10)

do you have the part # for that emblem on your seats?

thanks

pat

6LITEREATER

iTrader: (56)

Sorry I don't. I just went to ebay, did a search under "GM PERFORMANCE DIVISION" and bought the cheapest NEW pair...