post up your LED pics.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Dimitri, yeah they are on the fuel rail covers so they havent had a problem. been in there for about 8 months
Kandy, i took a product called Flourescent Acrylic. had it etched, then cut out the letters on a table scroll saw. leaving a 1" boarder at the bottom, so i could add the LEDS and so that the letters were all one piece. then covered over the 1" boarder with a bent piece of aluminum to hide the wires and LEDS
Kandy, i took a product called Flourescent Acrylic. had it etched, then cut out the letters on a table scroll saw. leaving a 1" boarder at the bottom, so i could add the LEDS and so that the letters were all one piece. then covered over the 1" boarder with a bent piece of aluminum to hide the wires and LEDS
Just some before and after pix of my Jimmy. I had Nathan @ LEDGauges perform the swap for me (Thanks Again Nathan).
The last one of my HVAC unit has 3 LED's and one regular bulb because I messed up one of the LED's. 
Copy & Paste Moderator
Joined: Apr 2002
Posts: 9,764
Likes: 208
From: Eastern MA
Originally Posted by 99WS-6T/A
where can you get the clear piece that goes where your plate would go. i want one.
Its $50 though.
