Quarter stick install with m6 console
Quarter stick install with m6 console I know this topic is wanted/asked about alot so i decided to do it
Here's before...and after. It's a 700r4 quarter stick with m6 console.
Went from this ...
to this...
Here's before...and after. It's a 700r4 quarter stick with m6 console.
Went from this ...
to this...
^sorry no pics on how i did it. Although I will tell you i had to space the Shifter up about 2" in the back to get the shifter to be able to clear the edges of the boot opening when in park and first. Trust me..it was a pain..but can be done with a little ingenuity.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Looks good, but are you going to fill in the gap that was left. I know you can see bare metal. Also I agree you should remove the shift pattern, may have some one cut one of the manul pattern to sit in its place. But good job!!
