flip down license plate
#1
TECH Fanatic
Thread Starter
iTrader: (12)
Join Date: Sep 2005
Location: South Burbs of Chicago
Posts: 1,593
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
hey guys,
UPDATE 3/19 INSTALLED!!!!
Now you see it
![](http://i114.photobucket.com/albums/n259/camarossnut/fdlp2.jpg)
Now u dont
![](http://i114.photobucket.com/albums/n259/camarossnut/fdlp1.jpg)
i have been brewing up an idea for awhile now, and i decided im going to fab it up tomorrow.
i live in illinois and they say u NEED 2 plates on the car at all times. SO....i am fabricating a flip down front flat for the ss. They have them out there but they are like $70, screw that.
No this is not some james bond, flip the license plate while driving type of deal!
just a way to put it down when im driving around and put it up for shows.
im going to use (2) .5 inch thick plexi glass peices to hindge together and screw the license plate into the other. then when i want it up (hidden), its either going to be velcro (prob not) a tiny latch (like on the back of a picture frame) or somehow to rig up a magnet......
i DO NOT want a motorized one as cool as it would be, this is just a cheap way to go from on to off without being a pain in the ***.
any comments or ideas to make this better?????
thanks
kevin
PS,
I got pulled over 4 times in a week for no front plate and yes i had it bolted on the air dam but that ticket was labeled (illegal display of front license plate) so this IS going to happen......the bottom line is, ILLINOIS SUCKS!
UPDATE 3/19 INSTALLED!!!!
Now you see it
![](http://i114.photobucket.com/albums/n259/camarossnut/fdlp2.jpg)
Now u dont
![](http://i114.photobucket.com/albums/n259/camarossnut/fdlp1.jpg)
i have been brewing up an idea for awhile now, and i decided im going to fab it up tomorrow.
i live in illinois and they say u NEED 2 plates on the car at all times. SO....i am fabricating a flip down front flat for the ss. They have them out there but they are like $70, screw that.
No this is not some james bond, flip the license plate while driving type of deal!
just a way to put it down when im driving around and put it up for shows.
im going to use (2) .5 inch thick plexi glass peices to hindge together and screw the license plate into the other. then when i want it up (hidden), its either going to be velcro (prob not) a tiny latch (like on the back of a picture frame) or somehow to rig up a magnet......
i DO NOT want a motorized one as cool as it would be, this is just a cheap way to go from on to off without being a pain in the ***.
any comments or ideas to make this better?????
thanks
kevin
PS,
I got pulled over 4 times in a week for no front plate and yes i had it bolted on the air dam but that ticket was labeled (illegal display of front license plate) so this IS going to happen......the bottom line is, ILLINOIS SUCKS!
Last edited by Camaro Ryder KV; 03-19-2007 at 02:24 PM.
#2
TECH Resident
iTrader: (5)
Join Date: Mar 2005
Location: Wood River, IL
Posts: 979
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
i don't understand why everybody thinks putting on the airdam avoids the problem. it's improper display just like not having the plate there.
honestly you're 10x better off running NO plate than putting it on the air dam.
i do like where you're going with the idea though.
honestly you're 10x better off running NO plate than putting it on the air dam.
i do like where you're going with the idea though.
#3
TECH Fanatic
Thread Starter
iTrader: (12)
Join Date: Sep 2005
Location: South Burbs of Chicago
Posts: 1,593
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
yea ive paid well over $150 ALONE in NO Front/Improper Tags fines.....its just getting out of hand......this way it will be in a stock location perfectly visible
#4
TECH Fanatic
iTrader: (10)
Join Date: Oct 2004
Location: HTX
Posts: 1,271
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
no need for 0.5" thick plexiglass. try a material called Lexan (polycarbonate). you can go thinner because it's impact resistant to a degree, and if it's thin enough, you can form it similar to sheetmetal.
Last edited by kerryt1; 03-17-2007 at 11:44 AM.
#7
TECH Fanatic
Thread Starter
iTrader: (12)
Join Date: Sep 2005
Location: South Burbs of Chicago
Posts: 1,593
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
hey guys, got it fabbed up today.....
i used 2 metal hinges
.25 inch thick lexan
factory front license bolts
and a clasp and hole latch
i am smoothing out the bottom tonight along with cutting off the excess bolt that screw in the LP, once they are grinded down, it flips back perfect! there is a tiny hook at the bottom that is barley noticable and i put a tiny latch thingie under the bumper, cant see anything!!!!
ground clearance is not an issue also!
citrique please!!!
thanks guys!
![](http://i114.photobucket.com/albums/n259/camarossnut/FRONTTA.jpg)
i used 2 metal hinges
.25 inch thick lexan
factory front license bolts
and a clasp and hole latch
i am smoothing out the bottom tonight along with cutting off the excess bolt that screw in the LP, once they are grinded down, it flips back perfect! there is a tiny hook at the bottom that is barley noticable and i put a tiny latch thingie under the bumper, cant see anything!!!!
ground clearance is not an issue also!
citrique please!!!
thanks guys!
![](http://i114.photobucket.com/albums/n259/camarossnut/FRONTTA.jpg)
![](http://i114.photobucket.com/albums/n259/camarossnut/FRONTTA2.jpg)
Trending Topics
#11
TECH Junkie
iTrader: (104)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
What would be a sensible price to pay for one of these if fabricated & marketed?!?
I know a person who made a motorized unit for his LT1 based Camaro Z-28, & simply cut a slot in the top area of the grill section for the unit to come out. (Unless you actully lean over & look up in the front grill opening, you'd never know it's there.)
I tried to get him to make me some templates so we could start making/selling them, but he claims he just doesn't have the time. (Plus he would have to remove the front bumper from his car again in order to take the measurements required.)
Yes, you would most likley have to remove the front bumper to mount this to your own car. But the unit would come complete, with a cutting template. So you dis-assemble, mount, wire, mount switch, re-assemble bumper & your working magic!
I seriously think it may be $100-125, but really don't have a clue what he has in it for fabrication yet. And I don't know if that would be low enough price to really sell it. Fact is, you have to 'cut-up' your factory front bumper. Some people I can't see cutting up their car like that.
I know a person who made a motorized unit for his LT1 based Camaro Z-28, & simply cut a slot in the top area of the grill section for the unit to come out. (Unless you actully lean over & look up in the front grill opening, you'd never know it's there.)
I tried to get him to make me some templates so we could start making/selling them, but he claims he just doesn't have the time. (Plus he would have to remove the front bumper from his car again in order to take the measurements required.)
Yes, you would most likley have to remove the front bumper to mount this to your own car. But the unit would come complete, with a cutting template. So you dis-assemble, mount, wire, mount switch, re-assemble bumper & your working magic!
I seriously think it may be $100-125, but really don't have a clue what he has in it for fabrication yet. And I don't know if that would be low enough price to really sell it. Fact is, you have to 'cut-up' your factory front bumper. Some people I can't see cutting up their car like that.
#12
TECH Enthusiast
iTrader: (1)
Join Date: Dec 2005
Location: Champaign, Illinois
Posts: 536
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I know how you feel, I am in a burb of Chicago too and got two warnings before finally getting a ticket for it. Pissing and moaning, I attached the factory license plate holder to my perfect lt1 TA front bumper. One of the saddest days I have had with my car. I havent been pulled over since.
I originally wanted to do what your doing but everyone told me to just put that factory bracket on.
![Driving](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_driving3.gif)
I originally wanted to do what your doing but everyone told me to just put that factory bracket on.
![Sad](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_sad.gif)
#14
Teching In
Join Date: Jan 2007
Location: Burbs of Chicago
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I live in mundelin, Vernon Hills area and I dont get botherd by anyone for no front plate. Heck, most of the BMW's Mercedes's and ALL of the Corvettes I see around me have no front plate. The only time I get nailed for no front plate is when my car is parked someplace INSIDE the city of Chicago limits, thats it. I havent had a front plate on any one of the 5 cars I've driven in the past 4 years.
#16
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
HAHA i feel your pain....ig ot pulled ovr twice for this **** in my town....ILLINOIS SUX *****!....plsu the damn snow!! but yea this is a great idea hope u dont mind if i steal it!
#18
TECH Fanatic
Thread Starter
iTrader: (12)
Join Date: Sep 2005
Location: South Burbs of Chicago
Posts: 1,593
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
i live in mokena, but every single time i got pulled over for it was in orland park.........picks of it installed are coming tomorrow, looks pretty sweet!