sun visor delete
Mine hangs down an inch cause i hang something up there that holds my cds. I'd do the !mod if there was a write up...not sure if we need one or not. I'd like to see pics of it.
when i got mine driver side was already off, on the way home from buyin it the first time i punched it the passenger one fell off, i got new brackets and hung them back up today, but im not sure i like them either, my car has a 6 inch tint strip at the top of the windshield and i would highly recomend that to everyone cuz it keeps the sun outa your eyes like the visors would but i just like the way it looks better without the crappy visors.
Man thats weird, my 150k mile **** bucket's visors worked fine, I replaced them when I did the Tan to Ebony INT conversion, but the only problems the stockers had was a stretched out elastic band..
I peeled the airbag warning stickers off to clean up the look a little, but until I get a tint strip put in, I'll leave the visors on. Anyone else get a LOUD-*** snapping noise when you open or close the vanity mirrors? Sounds like I'm busting it off everytime! Swat
TECH Enthusiast
Joined: Jan 2006
Posts: 555
Likes: 0
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Five Reasons the Camaro Was the Most Pivotal Player in the Pony Car Wars 2.0
Brett Foote
10 Reasons the LS7 Is GM's Most Extreme Naturally Aspirated V8 Engine Ever
Verdad Gallardo
Just in case anyone wants to do this, I resurrected an old thread. I made the plates out of some plastic I had laying around the garage.
Attached picutre is a photocopy, so it's actual size. You can print it out and use it as a template.
Attached picutre is a photocopy, so it's actual size. You can print it out and use it as a template.
Launching!
Joined: Jun 2010
Posts: 238
Likes: 0
From: Jacksonville, FL
I've been planning on doing this for a while but I'm not sure if I will be able to get the triangular plastic mount off the visor without cutting the steel rod. Even if I have to I guess theres no big deal, but just wanted to know what I was getting into.
So damn tired of having thoes things..I never use them and they occasionally droop and almost always swing and drill me in the helmet at the track..
When I do this I plan on using a small plastic or steel circle painted black to fill the hole in the triangular mount so you cannot see through to the steel.
So damn tired of having thoes things..I never use them and they occasionally droop and almost always swing and drill me in the helmet at the track..
When I do this I plan on using a small plastic or steel circle painted black to fill the hole in the triangular mount so you cannot see through to the steel.
Why not just grind the pain out of the hole with a Dremel and fill it with JBWeld? Then sand it to shape, primer it and pair with gloss or semi-gloss black paint...or grey or tan to match your interior.
Launching!
Joined: Jun 2010
Posts: 238
Likes: 0
From: Jacksonville, FL
I was hoping to be able to possibly put them back on if I wanted to. That is if I could get the visor off the rod without cutting it, and if I'm able to slide the triangle off the end.
On The Tree
Joined: May 2011
Posts: 177
Likes: 0
From: Cleveland (216)
On The Tree
Joined: May 2011
Posts: 177
Likes: 0
From: Cleveland (216)
