Latest WS6 photoshoot w/ Strano springs, CCW's, tint, etc.
09-01-2007 | 07:27 PM
#1
Thread Starter
TECH Enthusiast
iTrader: (4)
Joined: Dec 2001
Posts: 518
Likes: 0
From: Long Island, NY
Latest WS6 photoshoot w/ Strano springs, CCW's, tint, etc. So it's been quite a while since I've taken some decent pics with the car in it's latest state.
Unfortunately the lighting wasn't the best as I didn't realize how quickly the sun was setting after leaving a local cruise spot, oh well
The rear sits a tiny bit higher than normal as the axle tubes on my Moser 12 are bigger than a stock 10 bolt. I may bring the back down by about 1/4"-3/8" or so by cutting down the spring isolators or switching to the LT1 units.
Finally some decent pics with the Strano springs/Koni DA's, CCW's, tint, etc:
Unfortunately the lighting wasn't the best as I didn't realize how quickly the sun was setting after leaving a local cruise spot, oh well
The rear sits a tiny bit higher than normal as the axle tubes on my Moser 12 are bigger than a stock 10 bolt. I may bring the back down by about 1/4"-3/8" or so by cutting down the spring isolators or switching to the LT1 units.
Finally some decent pics with the Strano springs/Koni DA's, CCW's, tint, etc:
Trending Topics
09-02-2007 | 09:09 AM
#17
Thread Starter
TECH Enthusiast
iTrader: (4)
Joined: Dec 2001
Posts: 518
Likes: 0
From: Long Island, NY
Thanks for all the compliments 
There are still 1 or 2 subtle things I'd like to do and the exterior will be exactly the way I want and 'done' (as if these things are ever 'done')
Koni Dual-Adjustable
There are still 1 or 2 subtle things I'd like to do and the exterior will be exactly the way I want and 'done' (as if these things are ever 'done')
Originally Posted by transambandit
what shocks?
