Eagle eye projector help....
Can anyone tell me where the green and black wires should
hook up? Thanks.
Brian
Anyways, the black wires you simply ground and the blue wires you hook up to whatver you want to power the Halos/LEDS.
Mine get power when the nitrous comes on but you could splice them into your foglights, DRL's, etc... Or just get a toggle switch and send power to them only.
You could even get a factory foglight switch and add it to your dash OR splice two wires together off the factory switch (the power in and power out wires) so that the foglights are always on when the headlights are on (who ever turns them off anyways???) and then send a 12v ignition power to the switch and run the out wire to the Halos.
just looked at them under bad lighting,and just noticed 2 bare wires.
Amazed there wasn't any instructions.
Thanks again.
but glade you got it figured out, where did you hook it up? the foglights like i mentioned to you? 


