Cahill93Z28

I don't know how it fell out, but i noticed the handle on the e brake felt loose, and sure enough the screw that goes on the side was missing, anyone know what size these are?

thanks

00CaliforniaZ28

iTrader: (11)

I think its actually a rivet that holds the handle on...

Cahill93Z28

pretty sure its a phillips screw like the rest of the interior pieces

cooltc2004

iTrader: (1)

On the 3rd gens its a screw, bloody small too. Dont know the correct size though.

Cahill93Z28

TTT anybody?

The Postman

iTrader: (44)

if you are talkin about the 2000 model in ur sig then its a rivet....i know this for a fact, same thing happened to me except the whole e-brake handle came out and i had to tear the center console apart to fix it, but yes it is a rivet and not a screw.

6LITEREATER

iTrader: (56)

^^Correct. It is a rivet, not a screw and I haven't felt one that didn't feel loose...

Cahill93Z28

how do i repiar this?

The Postman

iTrader: (44)

I took a 1/4 inch rivet and useing a rivet gun replaced it.....but thats not the right size..not sure what the right one is...i used a 1/4 cuz it was all i had

brianfromhawaii

iTrader: (3)

Every camaro I have ever been in has felt loose... Take it off and fill with epoxy

Shockwave179

iTrader: (7)

"Take piece of scrap black plastic of the appropriate thickness and inserted it between the handle and the arm. This worked best on the side without the rivet."