Side molding
use a hairdryer to heat up the molding and slowly peel it back off. whatever residue you have left on the door panels/quarter panels can be removed with WD-40. polish then wax the area and youre done. takes about an hour or so. just dont force it off or you might take paint w/it...
for the T/A, well since I have an SS i dont have that issue but people who have removed them have used a hairdryer and fishing line to take them off. heat up the T/A and run the fishing wire between the panel and the lettering. DONE!!!
here's a write up i did on it...
http://www.ls1.com/forums/showthread.php?t=49240
here's a T/A write up:
https://ls1tech.com/forums/showthrea...=673523&page=1
for the T/A, well since I have an SS i dont have that issue but people who have removed them have used a hairdryer and fishing line to take them off. heat up the T/A and run the fishing wire between the panel and the lettering. DONE!!!
here's a write up i did on it...
http://www.ls1.com/forums/showthread.php?t=49240
here's a T/A write up:
https://ls1tech.com/forums/showthrea...=673523&page=1
