check out this
check out this pics may be small....sorry at a work computer
block back from machine shop...
bore, hoan, cam bearings, rod, bearings, maing bearings, recondition rods and pistons, line bore, balance, assembled, file fit rings
stg 2.5 heads
ms3
fast90/90
fast rails
ls2 chain
ls7 lifters
forged dish pistons
stock crank
will be getting it in and tuned soon.....hope ya like
block back from machine shop...
bore, hoan, cam bearings, rod, bearings, maing bearings, recondition rods and pistons, line bore, balance, assembled, file fit rings
stg 2.5 heads
ms3
fast90/90
fast rails
ls2 chain
ls7 lifters
forged dish pistons
stock crank
will be getting it in and tuned soon.....hope ya like
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
364 ci
6.0
i would rather have your hate than the stress of building one of these engines......too f in expensive and time consuming!!!!
it will pay off in the end though i am sure
6.0
i would rather have your hate than the stress of building one of these engines......too f in expensive and time consuming!!!!
it will pay off in the end though i am sure
amen to that im fixing to have to pull mine becuase the builder didnt put the oil galley plugs in and i didnt think to check them cause the motor had the front and rear cover installed on it. and now i cant build oil pressure.
Wow, that's hot. What headers are those? And what injectors are you using?
That's pretty much the engine I'm going to build only difference is the displacement which will be 383, and forged. Same heads and cam though. Hope to be just under 500wheel.
That's pretty much the engine I'm going to build only difference is the displacement which will be 383, and forged. Same heads and cam though. Hope to be just under 500wheel.