what's needed to be done to...
what's needed to be done to... make 15x8 weld pro stars fit on the rear? some say grind down the fins on the caliper, others say nothing. should i run spacers on the back too? any help is greatly appreciated.
Chris
Chris
Re: what's needed to be done to... Chris, I had a few sets of 15x8 Prostars.
Grind grind grind.
I did not use spacers. I don't think it's a good idea. I'm sure someone has pics of where they grinded.
Grind grind grind.
I did not use spacers. I don't think it's a good idea. I'm sure someone has pics of where they grinded.
Teching In
Joined: Nov 2001
Posts: 13
Likes: 0
From: Wisconsin
Re: what's needed to be done to... this is chris, i'm just at dan and jacki's house.....
what should i use to grind them down? belt sander? dremel? die grinder <img src="images/icons/wink.gif" border="0"> ? i am hoping this can be as painless as possible.
Chris <img src="images/icons/smile.gif" border="0">
what should i use to grind them down? belt sander? dremel? die grinder <img src="images/icons/wink.gif" border="0"> ? i am hoping this can be as painless as possible.
Chris <img src="images/icons/smile.gif" border="0">
TECH Apprentice
Joined: Nov 2001
Posts: 339
Likes: 0
From: Indianapolis, IN
Re: what's needed to be done to... with spacers you don't get as much of the bolt threaded into the lug nut which can possibly shear off then because of that. I used spacers for a while then decided to grind, grind, grind.
Chris I used a Craftsman Professional 4.5" 7 amp right angle grinder. Took NO time at all with this sucker!
Very worth it to me for no spacers looks better and wheels are basically flush then <img src="images/icons/smile.gif" border="0">
Chris I used a Craftsman Professional 4.5" 7 amp right angle grinder. Took NO time at all with this sucker!
Very worth it to me for no spacers looks better and wheels are basically flush then <img src="images/icons/smile.gif" border="0">
Teching In
Joined: Nov 2001
Posts: 23
Likes: 0
From: San Antonio, Tejas
Re: what's needed to be done to... How many threads you get into the bolt will have no effect on sheer strength. How much engagement are you getting? The only thing you will have to worry about is pulling the threads off of 5 bolts with a sideways load. In theory anyway.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Five Reasons the Camaro Was the Most Pivotal Player in the Pony Car Wars 2.0
Brett Foote
