EMBLEMPROS.COM's mirror stainless air dam - Check it out!
08-28-2008, 07:37 PM
#23
TECH Fanatic
iTrader: (1)
Join Date: May 2002
Location: Perrysburg,Ohio
Posts: 1,298
Likes: 0
Received 0 Likes
on
0 Posts
The only time mine ever comes close to scraping is loading it on and off the trailer......
Matt are these the same as stock or are they shorter like the ebay one? If they are short I will be one of the first to order one, but if not you will have to redesign it (I have about 1/4in to play with now loading and unloading!)
Matt are these the same as stock or are they shorter like the ebay one? If they are short I will be one of the first to order one, but if not you will have to redesign it (I have about 1/4in to play with now loading and unloading!)
08-29-2008, 07:27 AM
#28
TECH Addict
iTrader: (3)
Join Date: Oct 2005
Location: SE VA
Posts: 2,255
Likes: 0
Received 0 Likes
on
0 Posts
nice piece, but im in the camp of not going with a ridgid air dam. it needs to be able to bend and flex. ive been told and also agree, that instead of just getting scraped up, if you hit a bump/curb/whatever bad enough, it will rip the plastic its screwed to right out.
FYI: LT1 and LS1 air dams are the same.
FYI: LT1 and LS1 air dams are the same.
