Danny2tek

iTrader: (1)

I posted this in the fueling section but didn't get a response, and Im doing this for more of an appearance mod anyway so I'lll ask here

I purchased a fuel pressure guage that I plan to mount on the end of the rail, the question that I have is it came with a 90 degree adapter but I want to mount it facing forward. Is the 90 just that a 90 or is it some type of an adapter? The threads look the same and it screws right on......

The second pic is the way I want to mount it.

Havok2

iTrader: (118)

not sure i would just put it with the 90 so you can see it easier

Danny2tek

iTrader: (1)

Yea thats what I wound up doing, thanks anyway

LawmanSS

iTrader: (19)

The 90 should just be a 90 to make the gauge easier to read...there shouldn't be a problem going without it and having the gauge read straight forward.

slt200mph

iTrader: (42)

Just get the fitting that goes in the end of the fuel rail and you will be good to go.