Ebay Spoiler People, Come in!
Anybody have any problems where the spoiler lines up to the rear quarter panels? I was prefitting mine on and noticed that the spoiler didn't seem to meet the quarter panel quite right. ( near the middle portion of the edge of the spoiler.) I might just not have it adjusted right, but wanted to know if this has been an issue with anybody.
I'm glad the spoiler thing worked out.
Sorry to jump off topic but to the "doesn't read anything, he supports John McCain" comment I have to respond.
Obama has written more best selling books than any real legislation since he has been in Congress. (real legislation does not include non-binding resolutions, naming post offices, etc.).
Oh, and Obama is a communist. McCain is not much better, but at least McCain's V.P. never ran against him or said that he was way to inexperienced to be president before deciding to run with him...
Sorry to jump off topic but to the "doesn't read anything, he supports John McCain" comment I have to respond.
Obama has written more best selling books than any real legislation since he has been in Congress. (real legislation does not include non-binding resolutions, naming post offices, etc.).
Oh, and Obama is a communist. McCain is not much better, but at least McCain's V.P. never ran against him or said that he was way to inexperienced to be president before deciding to run with him...
I'm glad the spoiler thing worked out.
Sorry to jump off topic but to the "doesn't read anything, he supports John McCain" comment I have to respond.
Obama has written more best selling books than any real legislation since he has been in Congress. (real legislation does not include non-binding resolutions, naming post offices, etc.).
Oh, and Obama is a communist. McCain is not much better, but at least McCain's V.P. never ran against him or said that he was way to inexperienced to be president before deciding to run with him...
Sorry to jump off topic but to the "doesn't read anything, he supports John McCain" comment I have to respond.
Obama has written more best selling books than any real legislation since he has been in Congress. (real legislation does not include non-binding resolutions, naming post offices, etc.).
Oh, and Obama is a communist. McCain is not much better, but at least McCain's V.P. never ran against him or said that he was way to inexperienced to be president before deciding to run with him...
There really isn't any way to adjust it other than using the foam pieces below the left and right sides of the spoiler, and below the center posts. The spoiler can only be bolted in one way. When I bolted mine in I just pushed down on the spoiler a bit while tightening the bolts, but not too tight. I also went out and bought longer bolts with a bigger washer because I didn't really like the bolts that came with the spoiler. Mine does sit a tiny bit higher on one side but that is due to the center post foam pieces being just a tad too tall, but it is something I could definitely live with.
Also what are the small black plastic strips that came along with the pads and 3rd brakelight? They look like they have one tab with a hole on each. (there is like 6 I think)
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo Hmmm. Well I did not have the foam strips in place yet,because I did not want to attach them until after paint. I think I might need to take pics. I think the bigger washer thing on the bolts is a must. (the ones that came with it are too small for the holes on the trunk)
Also what are the small black plastic strips that came along with the pads and 3rd brakelight? They look like they have one tab with a hole on each. (there is like 6 I think)
Also what are the small black plastic strips that came along with the pads and 3rd brakelight? They look like they have one tab with a hole on each. (there is like 6 I think)
Alright, so it's on. Very easy install, and as said before, the foam crap needs to come off, but it was easy to get off. I put the foam on the pillars, because I had a gap there, needed to fix. Paint is great, slightly off, but my car has 100k mile old paint on it, it's going to look off. It's not OEM fit, it's about 1/2 cm off on each side of the spoiler, but for what you pay it's a great deal. It's hard to notice the gaps.
Oh and it's SUPER FREAKING LIGHT! The Z28 spoiler weights a ton compared to it. Now pics...
Oh and it's SUPER FREAKING LIGHT! The Z28 spoiler weights a ton compared to it. Now pics...
I have the same spoiler and got it painted by them too. Looks pretty good, has one little bubble in it. Can't complain too much for the price really.
I am thinking about adding the bolts to the center posts on mine, it sits about like yours but mine is white and gaps and that black foam really stand out. I am going to trim the foam back a bit and probably add those bolts and pull it down a bit. the pillars just don't sit close enough to the hatch as it is right now.
Might just be the pic but your hatch looks slightly shifted to the passenger side. My hatch seems skewed to the drivers side, I have about a 1/4 inch gap on the drivers side and around 3/8 on the passenger side, but the spoiler itself lines up with the hatch. So I need to make an adjustment to the hatch for mine.
I weighed the stock camaro spoiler and this one and this SS style weighs 1.8 pounds less, checked them several times and came up with the same each time. Not as big of a difference as I excpected based on other comments here about it being really light, but nice that it weighs less.
I am thinking about adding the bolts to the center posts on mine, it sits about like yours but mine is white and gaps and that black foam really stand out. I am going to trim the foam back a bit and probably add those bolts and pull it down a bit. the pillars just don't sit close enough to the hatch as it is right now.
Might just be the pic but your hatch looks slightly shifted to the passenger side. My hatch seems skewed to the drivers side, I have about a 1/4 inch gap on the drivers side and around 3/8 on the passenger side, but the spoiler itself lines up with the hatch. So I need to make an adjustment to the hatch for mine.
I weighed the stock camaro spoiler and this one and this SS style weighs 1.8 pounds less, checked them several times and came up with the same each time. Not as big of a difference as I excpected based on other comments here about it being really light, but nice that it weighs less.
I have the same spoiler and got it painted by them too. Looks pretty good, has one little bubble in it. Can't complain too much for the price really.
I am thinking about adding the bolts to the center posts on mine, it sits about like yours but mine is white and gaps and that black foam really stand out. I am going to trim the foam back a bit and probably add those bolts and pull it down a bit. the pillars just don't sit close enough to the hatch as it is right now.
Might just be the pic but your hatch looks slightly shifted to the passenger side. My hatch seems skewed to the drivers side, I have about a 1/4 inch gap on the drivers side and around 3/8 on the passenger side, but the spoiler itself lines up with the hatch. So I need to make an adjustment to the hatch for mine.
I weighed the stock camaro spoiler and this one and this SS style weighs 1.8 pounds less, checked them several times and came up with the same each time. Not as big of a difference as I excpected based on other comments here about it being really light, but nice that it weighs less.
I am thinking about adding the bolts to the center posts on mine, it sits about like yours but mine is white and gaps and that black foam really stand out. I am going to trim the foam back a bit and probably add those bolts and pull it down a bit. the pillars just don't sit close enough to the hatch as it is right now.
Might just be the pic but your hatch looks slightly shifted to the passenger side. My hatch seems skewed to the drivers side, I have about a 1/4 inch gap on the drivers side and around 3/8 on the passenger side, but the spoiler itself lines up with the hatch. So I need to make an adjustment to the hatch for mine.
I weighed the stock camaro spoiler and this one and this SS style weighs 1.8 pounds less, checked them several times and came up with the same each time. Not as big of a difference as I excpected based on other comments here about it being really light, but nice that it weighs less.
And the pic of my hatch isn't dead center, theres a gap, but it's less than what you actually see.
