6 speed to 350 question
Thread Starter
11 Second Club
iTrader: (14)
Joined: Aug 2008
Posts: 444
Likes: 0
From: Hendersonville TN
6 speed to 350 question I recently did a T56 to TH350 in my TA and followed the threads here for all the advice and tips. They were so well covered in all aspects that I was able to take care of it by myself in my apartment complex parking spot in 2 and a half days. It rained for the first 2 days otherwise I may have finished in 1 and a half.
Anyway..... I used a BMR cross member with torque arm mount on it and have been having some issues. I hear a really audible clunk when going over bumps in this thing and it even does it when coming to a slow stop. I can gas on it and flash the converter and make it pop at will. Other than being annoying, is there a problem I need to address? How many others have the same problem and how have you fixed it? Thanks. Alex.
Anyway..... I used a BMR cross member with torque arm mount on it and have been having some issues. I hear a really audible clunk when going over bumps in this thing and it even does it when coming to a slow stop. I can gas on it and flash the converter and make it pop at will. Other than being annoying, is there a problem I need to address? How many others have the same problem and how have you fixed it? Thanks. Alex.
