Fuddle stall
#1
TECH Enthusiast
Thread Starter
iTrader: (1)
Join Date: Aug 2008
Posts: 726
Likes: 0
Received 0 Likes
on
0 Posts
Fuddle stall
There is a Fuddle 3200 stall that i'm looking at buying. It is used, but only has 1500 miles on it. Question is will it work in my car? It came out of a 1993 z28. Also, within the next year or two i'll be swapping in a 12 bolt and a 4L80E, can i use a converter that was meant for a 4L60E or even a 700R4? Thanks.
#2
No, 1998 and up LS1 4L60E's use different converters due to the input shaft of the trans, and several other things.
A 4L80E needs a converter made for a 4L80E, if I understand that correctly.
And no one should be using a fuddle converter for anything anyway.
A 4L80E needs a converter made for a 4L80E, if I understand that correctly.
And no one should be using a fuddle converter for anything anyway.
Trending Topics
#8
#11
#17
It's funny, but this subject came up once before and a few people with still functioning fuddle converters got in and started defending them. Then right in the middle of the thread one of them came back and said his converter took a **** right after he was sticking up for fuddle, like two days later.
#18
It's funny, but this subject came up once before and a few people with still functioning fuddle converters got in and started defending them. Then right in the middle of the thread one of them came back and said his converter took a **** right after he was sticking up for fuddle, like two days later.