When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
This is taken off of one of the sites I frequent often. Basically set it up exactly as shown in the picture for those two tables, and that deletes the PWM
well i have 3 tunes i pulled off the repository that had them set at 96-10...is that not the proper setting?
yea but that slipping will burn up your stall converter over time...changing these settings will make it feel like an additional shift when it locks up.
now one more question...i was told you need to set your misfire tables to 327XX and my min/max tables are at that, but my medium table has a lot that arent that in the center, do i need to change them as well? thanks
now one more question...i was told you need to set your misfire tables to 327XX and my min/max tables are at that, but my medium table has a lot that arent that in the center, do i need to change them as well? thanks
dont have the misfire tables in the sixs...so I can't help you out there
I would like to know this as well. I just bought a used 3600 yank and will be installing it shortly. I have a diablo predator, will this be enough to tune it? Or will i need like a mail order tune?
Yea the predator is able to do it. When I got my vig stall in my car with the shift kit, I got a custom tune program and download into my pcm. It shifts and locks up when it supposed to.