TC Installed
Thread Starter
Staging Lane
Joined: Nov 2006
Posts: 68
Likes: 0
TC Installed just picked up my car from the transmission shop today, I had a Edge 3400 stall installed with a deep pan. The guy wasn't able to mount the tranny cooler for some reason so Ill have to climb under there and install it myself, he said " the stock cooling system is adequate enough to support the stall." I will be still installing the cooler.
The car runs great, what a difference the stall made, there is power all across the range, the car shifts great, i had a shift kit put in last year. It def. put a smile on my face, I was only able to drive for a short time before I had to be into work.
It was great dealing with Andre over at Edge, he is a very knowledgable guy and answered all my questions. The price of the converter was very reasonable also. This has been the best mod thus far.
The car runs great, what a difference the stall made, there is power all across the range, the car shifts great, i had a shift kit put in last year. It def. put a smile on my face, I was only able to drive for a short time before I had to be into work.
It was great dealing with Andre over at Edge, he is a very knowledgable guy and answered all my questions. The price of the converter was very reasonable also. This has been the best mod thus far.
Joined: Aug 2007
Posts: 24,241
Likes: 89
From: Turnin' Wrenches Infractions: 005
i have the Edge 3200 version and for such a "small" stall it hits hard as ****. it demolishes about any tire you put on the back. I dont know how efficient the converter is up top though, i have kinda been curious about that. And yeah andre is a super nice guy, i kept him on the phone for 30 minutes before i gave him my business. Off a 2K launch i cut a 1.69 60ft last time out to the track on Nitto 555rs. thats pretty decent i think. i will be upgrading to a stickier tire to hopefully get a 1.5X. i know this converter has it in it.
Teching In
Joined: Jan 2008
Posts: 1
Likes: 0
Sorry for bringing up an old thread, but what was your previous 60ft before the 1.6 with the stall? The last time i got a 1.98. Im looking at a doing a stall also and was just curious what i may be looking at, obviously with variables. Im also planning on doing a torque arm too but my goal is a 1.6x 60 ft.
Thanks,
Rob
Thanks,
Rob
