why is a py3400e better for nitrous?
Thread Starter
single digit dreamer
iTrader: (6)
Joined: Mar 2002
Posts: 9,757
Likes: 4
From: omaha ne
why is a py3400e better for nitrous? i have a py3400e on the way, it was recomened by patrick g and mike at yank based on my plans. 6.0 or bigger with 200+shot and a super strong driveline with lots of traction, not going to rev it very high either. also looking for prety good driveability.
these guys know their **** and i am glad to be going off their recomedations but now i would like to know what makes this a good converter for my set up. i hear stuff like the py3400e really kicks *** on nitrous, how does that relate to ET? will the truck run faster with a py3400e than a ss3800(or any other non power adder spacific stall) and if so why?
another example, last truck was a 6.0 with 8psi boost and a 75shot. the yank truck thruster3000 flashed to about 4200 just on boost and 4700 with the nitrous thrown in, would the py3400e have made that truck quicker?
these guys know their **** and i am glad to be going off their recomedations but now i would like to know what makes this a good converter for my set up. i hear stuff like the py3400e really kicks *** on nitrous, how does that relate to ET? will the truck run faster with a py3400e than a ss3800(or any other non power adder spacific stall) and if so why?
another example, last truck was a 6.0 with 8psi boost and a 75shot. the yank truck thruster3000 flashed to about 4200 just on boost and 4700 with the nitrous thrown in, would the py3400e have made that truck quicker?
