I just bought a ws6 a week ago and i'm looking for a stall to help me out. So far ive ordered a lid,cutout,tune and some hoosier drag radials.
Would a ss4000 stall be to much. I don't care about drive ability issues just getting out the whole and staying out there is my main concern.

 

Good choice!
but call me if you need questions answered at 775 826 9955
Dave

 

Something in the 4000 range would work but might be a bit much. Do you have any plans for a cam? We have a 4C that is rated at 3600-3800 that would be a better match for your current mods. We do have the 5C option in the 4000 range but with a factory cam it will be to much stall.

Chris

 

Also depends on what gears you have

 

A 4K may be a bit loose with factory gearing. Even a good 3200 will get you great 60ft times. Its more about what you are willing to tolerate during everyday driving. The SS4000 is a great choice for a converter though.

 

yes my future mods were
suspension work,long tubes, fast intake, 3.73's, trex cam

 

^^^well then in that case 4K or higher

 

Why are you set on a Trex? What are you wanting your car for?


If you end up going Trex for some reason, go minimum of 4000..

I prefer Vig.

 

The car is not going to be a daily driver it will see more track than street i was also thinking trex,4.11's,4400 stall

 

I vote for circle d, my old car had a 4c and that same stall is going in the new z, chris will take care of ya

 

Thanks