Automatic Transmission 2-Speed thru 10-Speed GM Autos | Converters | Shift Kits
Sponsored by:
Sponsored by:

Tranny problems !

Thread Tools
 
Search this Thread
 
Old Dec 15, 2003 | 09:42 AM
  #1  
artic-z28's Avatar
Thread Starter
On The Tree
 
Joined: Oct 2003
Posts: 173
Likes: 0
From: St. Charles, MO
Default Tranny problems !

All my tranny is doing it not locking up in OD ,,, When im giving it WOT it shifts fine all through the gears, Then when I let off sometimes it locks sometimes it doesnt, if it doesnt it take like 2 min or so to lock up ..

I think its my lock up noid ? any other sugestions?
Reply
Old Dec 15, 2003 | 02:23 PM
  #2  
DeepBlueZ's Avatar
TECH Fanatic
 
Joined: Oct 2003
Posts: 1,514
Likes: 0
From: Long Island, NY
Default

i had the same problem today....can TOO MUCH tranny fluid have anything to do with it???(have to check my fluid level again but i think i may have put too much in)
Reply
Old Dec 15, 2003 | 02:56 PM
  #3  
jimmyblue's Avatar
Moderator
iTrader: (11)
 
Joined: Mar 2002
Posts: 12,604
Likes: 7
From: East Central Florida
Default

Misfires (or what the PCM interprets as misfires) will
make the TCC unlock. Misfires can be pulled up with a
logger EFILive or ATAP), you might check this out before
getting into the hardware too deep. Something as simple
as a fouled spark plug or bad plug wire could be doing it
to you.
Reply
Old Dec 15, 2003 | 06:32 PM
  #4  
offaxis's Avatar
10 Second Club
20 Year Member
iTrader: (19)
 
Joined: Jun 2002
Posts: 2,062
Likes: 1
From: L-Town N.Y.
Default

Also your car has to reach a certain temp before it will lock up. So if its real cold like it is here it might take you a while to get up to temp. Ofcourse if you have a cam it might be misfire codes
Reply
Old Dec 16, 2003 | 12:01 AM
  #5  
artic-z28's Avatar
Thread Starter
On The Tree
 
Joined: Oct 2003
Posts: 173
Likes: 0
From: St. Charles, MO
Default

just changed the plugs " did it before i changed it" ill get my buddys autotap and see what it is ...
Reply
Old Dec 16, 2003 | 01:00 AM
  #6  
offaxis's Avatar
10 Second Club
20 Year Member
iTrader: (19)
 
Joined: Jun 2002
Posts: 2,062
Likes: 1
From: L-Town N.Y.
Default

artic-z28

Do you have a cam? I had alot of problems with my lock up after my cam went in. I have a few ideas that might work if you do
Reply




All times are GMT -5. The time now is 07:33 PM.