Performabuilt Level 2 tranny holds 678hp/763lbs
12-21-2009, 02:32 PM
#1
TECH Regular
Thread Starter
iTrader: (7)
Join Date: Jun 2007
Location: Keller, Tx
Posts: 435
Likes: 0
Received 0 Likes
on
0 Posts
Performabuilt Level 2 tranny holds 678hp/763lbs 678/763
416ci Virginia Speed Built LS3
Performabuilt Level 2 4L60E
Nitrous Outlet plate kit
Big shout out to Virginia Speed for building my motor. I overheated it by accident (left the ewp unpugged) and it hit 262 degrees and spewed coolant everywhere. Then melted a spark plug. Motor still clicked off a 10.82@125mph in a auto GTO without the nitrous. It ran a 10.25 with it breaking up pretty bad because of the plug. Car has a good shot at running a 9.
Thanks to Performabuilt for an awesome tranny!
Big shout out to SNL Performance in Haslet, Texas for continously working with me to make the car faster. Those guys are great. If you want great customer service give them a call.
Had Nitrous Outlet install the kit and I'm getting nothing but compliments on the setup. It looks nothing less than fantastic and worked the first time out. They did an excellent job on the install.
Dyno sheet:
http://i475.photobucket.com/albums/r...onsta/Dyno.jpg
Dyno video:
http://www.youtube.com/watch?v=QduxsBcxDU0
Went to the track for some shakedown passes yesterday. It was cutting out real bad and and melted a plug. Think it's too lean or has too much timing. I'm going to work on correcting that. It still went 10.25. Transmission didn't even skip a beat on the 4 passes I made at the track or the 4 dyno passes I made. Even with that much torque.
My goal is to be the first GTO in the 9s on a 4L60E tranny, 17" wheels and bone stock suspension. I got a Performabuilt tranny on my side
416ci Virginia Speed Built LS3
Performabuilt Level 2 4L60E
Nitrous Outlet plate kit
Big shout out to Virginia Speed for building my motor. I overheated it by accident (left the ewp unpugged) and it hit 262 degrees and spewed coolant everywhere. Then melted a spark plug. Motor still clicked off a 10.82@125mph in a auto GTO without the nitrous. It ran a 10.25 with it breaking up pretty bad because of the plug. Car has a good shot at running a 9.
Thanks to Performabuilt for an awesome tranny!
Big shout out to SNL Performance in Haslet, Texas for continously working with me to make the car faster. Those guys are great. If you want great customer service give them a call.
Had Nitrous Outlet install the kit and I'm getting nothing but compliments on the setup. It looks nothing less than fantastic and worked the first time out. They did an excellent job on the install.
Dyno sheet:
http://i475.photobucket.com/albums/r...onsta/Dyno.jpg
Dyno video:
http://www.youtube.com/watch?v=QduxsBcxDU0
Went to the track for some shakedown passes yesterday. It was cutting out real bad and and melted a plug. Think it's too lean or has too much timing. I'm going to work on correcting that. It still went 10.25. Transmission didn't even skip a beat on the 4 passes I made at the track or the 4 dyno passes I made. Even with that much torque.
My goal is to be the first GTO in the 9s on a 4L60E tranny, 17" wheels and bone stock suspension. I got a Performabuilt tranny on my side
12-23-2009, 11:54 AM
#3
12 Second Club
iTrader: (7)
Join Date: Jun 2009
Location: Baltimore, MD
Posts: 406
Likes: 0
Received 0 Likes
on
0 Posts
Very impressive, that's why I'm saving my pennies for a Level 2 come income tax time. I've done my research and stories like this just reaffirm my decision.
Thanks!
Thanks!
