I am building a 1969 chevy nova and wanted to know if i go with the 4l60e and a manual valve body then i dont have to use any electronics is that right. And if i do go manual valve body what kit should i use and where can i find it. I am going carburated and using the msd box please any info would be great thank you

 

http://www.performancetransparts.com...n=Custom&ID=26

it should be full manual control. id like to know more about it as well. i use my TA just for occassional driving and id love to have a manual valve body.

 

All you would need is the transgo -3 kit and vacuum modulation, requires a complete tear down to do correctly.

 

thats what i was thinking of going with was the transgo kit saw a couple write ups in here about it but didn't know if there were other ways to go thanks for the input

 

does anybody have a good idea on what car or truck i should get my trans from is there anything i should avoid i have seen people talking about the truck trans would that be the best route

 

I belive 2001 or newer had the 5 pinion planets and some other upgrades.