allan808

iTrader: (3)

1) how much quarts do yall put in a 4l60e and what oil is best?
2) do you change the filter,if so what filter do yall use?
3) where do you drain and fill the trans?

thanks in advance!

Badazz 97 TA

iTrader: (18)

1: depends on the size of the converter and type of pan your using
2: GM replacement.
3: You fill the trans through the dipstick tube. Draining it is another story. If the pan has no plug then you un-bolt the pan then about 4 quarts ends up on the floor OR all over your clothes. it sucks lol

allan808

iTrader: (3)

its stock stall etc..i just want to replace the fluid and filter..the car is a 98 trans am..

Badazz 97 TA

iTrader: (18)

By dropping the pan you will need approx 5qts of fluid. You can hit up a local parts store for the parts. Dex 3 fluid. Any brand of your choice.

Bill Bowling

iTrader: (6)

It is also good to have the trany flushed every once in awile. It cost about $75 + but you then know all your fluid is clean not just 4-5 qts.

Bill

Squirts11

iTrader: (14)

This is at your own risk. I've heard plenty of horror stories regarding high-milage cars getting the tranny flushed...then

MadIceV8

iTrader: (12)

This is because of an already preexisting problem (from probably not changing the fluid).