Does your shift kit do this
Thread Starter
TECH Fanatic
Joined: Nov 2008
Posts: 1,776
Likes: 1
From: South Dakota
Does your shift kit do this When my car is WOT or when you kinda get on it, when it shifts, it sounds like someone is taking a sludge hammer to it, and maybe i'm crazy but i think there a few times when i thought my center console has lifted. And i know a shift kit isn't suppost to do that
Trending Topics
Thread Starter
TECH Fanatic
Joined: Nov 2008
Posts: 1,776
Likes: 1
From: South Dakota
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
I agreee with the above post. If your center console is moving on shift, it has nothing to do with line pressure. It's a mount issue somewhere. The shifter is directly connected to the transmission, the shifter may be what's causing the console to move. The mount may look alright, but you have to consider that the heavy transmission is sitting on top of it pressing it down.
I would check the torque arm, the transmission mount, and the transmission crossmember for loose or broken bolts again. A new transmission mount is 50$, and it takes 10 minutes once you get the car lifted up.
I would check the torque arm, the transmission mount, and the transmission crossmember for loose or broken bolts again. A new transmission mount is 50$, and it takes 10 minutes once you get the car lifted up.
if you have a shift kit you do not want to mess with the line pressure. part of what the kit does is mechanically mess with the pressure. my shift kit was installed with 3 washers (the firmest on the 1-2 shift, and it shifts EXTREMELY fast but there is no banging.
Rockstar
iTrader: (15)
Joined: Feb 2009
Posts: 1,582
Likes: 0
From: I'm on a boat! in Shreveport, La
I go through a trans mount every 4-6 months. I know what that is like, and what you have, is 100%, a broken transmission mount.
Is yours a rubber or poly mount?
Is yours a rubber or poly mount?
May be. It's been about 5 years since I replaced mine with a Poly. Either way, it's something that is relativily cheap and easy to do. Whether it's the issue or not, it's not going to break the bank if it's not the issue.
I guess I'm use to the Cadillac tax on the Poly mount for my CTSV that I purchased a few months ago.
I guess I'm use to the Cadillac tax on the Poly mount for my CTSV that I purchased a few months ago.
Oh well, its replace and all is good.