Automatic Transmission 2-Speed thru 10-Speed GM Autos | Converters | Shift Kits
Sponsored by:
Sponsored by:

stall problems

Thread Tools
 
Search this Thread
 
Old 04-22-2010, 02:56 PM
  #1  
Teching In
Thread Starter
 
1998ls1z28's Avatar
 
Join Date: Aug 2008
Posts: 12
Likes: 0
Received 0 Likes on 0 Posts
Default stall problems

ok i just got done putting a cam in my car and broke the transmission oil pump. i replaced the pump and now my car will not get up on the stall converter. i have tried everything i put new seals on the pump and a new converter in the car any ideas? its a 1998 camaro with a 4l60e any help would be appreciated cuz im lost

Last edited by 1998ls1z28; 04-22-2010 at 04:13 PM.
Old 04-22-2010, 04:57 PM
  #2  
Teching In
Thread Starter
 
1998ls1z28's Avatar
 
Join Date: Aug 2008
Posts: 12
Likes: 0
Received 0 Likes on 0 Posts
Default

yeah the car drives but will bog sometimes at low rpms and short shift supper short
Old 04-23-2010, 09:03 AM
  #3  
Teching In
 
MislMan's Avatar
 
Join Date: Nov 2007
Posts: 38
Likes: 0
Received 0 Likes on 0 Posts

Default

Have you checked the fluid level after you drove the car and circulated the tranny fluid?
Old 04-23-2010, 09:03 AM
  #4  
Teching In
Thread Starter
 
1998ls1z28's Avatar
 
Join Date: Aug 2008
Posts: 12
Likes: 0
Received 0 Likes on 0 Posts
Default

yes the car is tuned for the cam idk how right the tune. i got a mail order tune that runs great but from all of the data logs there isnt any problems with any of the tune. its a tci 3200 converter
Old 04-23-2010, 09:42 AM
  #5  
Teching In
Thread Starter
 
1998ls1z28's Avatar
 
Join Date: Aug 2008
Posts: 12
Likes: 0
Received 0 Likes on 0 Posts
Default

yeah i double checked all the fluids after i drove it the first time with the new converter in it




All times are GMT -5. The time now is 01:01 PM.